Dell Latitude C840 Service Manual - Page 36

Display Latch, Replacing the Display Panel

Get Dell Latitude C840 PDF manuals and user guides
UPC - 609525176179
View all Dell Latitude C840 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Display: Dell Latitude C840 Service Manual 1 ZIF connector 2 standard connector Replacing the Display Panel NOTE: Use a magnetic screwdriver to reassemble the display panel in the display. 1. Connect the flex cable to the two connectors on the back of the display panel. 2. Place the display panel in the top cover, taking care that the flex cable is in place and is not crushed or crimped. 3. Reinstall the M2.5 x 4-mm screw that secures the flex-cable mounting bracket to the top cover. 4. Starting on the left side, use a magnetic screwdriver to reinstall the six M2 x 3mm screws that secure the display panel in the top cover. 5. Reinstall the M2.5 x 6-mm flex-cable strain relief screw, and reconnect the flex cable to the graphics card. 6. Reinstall the display bezel. Display Latch file:///F|/Service%20Manuals/Dell/Latitude/c840/display.htm (9 of 10) [2/28/2004 8:03:40 AM]

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
Display: Dell Latitude C840 Service Manual
1
ZIF connector
2
standard connector
Replacing the Display Panel
NOTE:
Use a magnetic screwdriver to reassemble the display panel in the
display.
1.
Connect the flex cable to the two connectors on the back of the display panel.
2.
Place the display panel in the top cover, taking care that the flex cable is in
place and is not crushed or crimped.
3.
Reinstall the M2.5 x 4-mm screw that secures the flex-cable mounting bracket
to the top cover.
4.
Starting on the left side, use a magnetic screwdriver to reinstall the six M2 x 3-
mm screws that secure the display panel in the top cover.
5.
Reinstall the M2.5 x 6-mm flex-cable strain relief screw, and reconnect the flex
cable to the graphics card.
6.
Reinstall the display bezel.
Display Latch
file:///F|/Service%20Manuals/Dell/Latitude/c840/display.htm (9 of 10) [2/28/2004 8:03:40 AM]