Dell M2300 User's Guide - Page 112
Rotate the keyboard up 90-degrees and lay it on the palm rest to gain access to the keyboard connector.
View all Dell M2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
1 Follow the instructions in "Before You Begin" on page 109. 2 Remove the hinge cover (see "Hinge Cover" on page 111). 1 2 3 4 5 6 1 screws (3) 4 pull-tab 2 keyboard tabs (5) 3 palm rest 5 keyboard-cable locking arm 6 keyboard cable connector NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the keyboard. 3 Remove the three screws across the top of the keyboard. NOTE: Lift the keyboard carefully in step 4 to ensure that you do not pull on the keyboard cable. 4 Rotate the keyboard up 90-degrees and lay it on the palm rest to gain access to the keyboard connector. 5 If the keyboard cable is held in place by a keyboard lock arm next to the keyboard connector, carefully pivot the lock arm upward to uncover the cable. 6 Pull up on the pull-tab to disconnect the keyboard cable connector from the keyboard connector on the system board. NOTE: When you replace the keyboard, ensure that the keyboard tabs are completely in place to avoid scratching the palm rest. 112 Adding and Replacing Parts