Dell M5200 Medium Workgroup Mono Laser Printer Dell™ Workgroup Laser - Page 200
Replacing the transfer roller, Turn the printer off and unplug the printer power cord.
View all Dell M5200 Medium Workgroup Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
15. Release the metal arm-like tab. 16. Reinstall the toner cartridge and close the front doors. 17. Plug the printer power cord into a properly grounded electrical outlet. 18. Reset the maintenance counter. See Resetting the maintenance counter. Replacing the transfer roller Order a new transfer roller when light print, toner fog, or background shading appears on printed pages. See Ordering supplies for information on ordering a transfer roller. Complete the following steps to replace the transfer roller. Refer to the documentation that comes with the transfer roller for detailed installation information. 1. Turn the printer off and unplug the printer power cord. 2. Open the front doors and remove the toner cartridge. 3. Locate the used transfer roller on the lower floor of the toner cartridge housing. 4. Pry the left side of the transfer roller up from its slot to loosen it. (Use any kind of small tool.)