Dell M5200 Medium Workgroup Mono Laser Printer Dell™ Workgroup Laser - Page 25
Installing optional drawers
View all Dell M5200 Medium Workgroup Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Installing optional drawers CAUTION: If you are adding an optional drawer sometime after setting up the printer, be sure to turn the printer off, unplug the power cord, and disconnect all cables from the back of the printer before completing these tasks. To increase paper capacity, you can purchase optional 250-sheet and/or 500-sheet drawers. Optional drawers attach under the printer and optional duplex unit. The printer automatically recognizes any drawer that is installed. A drawer consists of a tray and a support unit. The 250-sheet drawer and the 500-sheet drawer are installed the same way. 1. Remove the tray from the support unit. Remove all packing material, tape, and decals. 2. Place the support unit on top of the table or printer cabinet where you plan to use the printer. The tab, round peg, and square holes on top of any drawer help you position the support unit so the edges are aligned properly. Make sure the support unit is securely in place.