Dell Mobile M115HD Dell M115HD User Guide - Page 15
Using Your Projector
View all Dell Mobile M115HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
3 Using Your Projector Turning Your Projector On NOTE: Turn on the projector before you turn on the source (computer, DVD player, etc.). The Power button light blinks white until pressed. 1 Connect the power cord with AC adapter and appropriate signal cables to the projector. For information about connecting the projector, see "Connecting Your Projector" on page 7. 2 Press the Power button (see "Using the Control Panel" on page 20 to locate the Power button). 3 Turn on your source (computer, DVD player, etc). 4 Connect your source to the projector using the appropriate cable. See "Connecting Your Projector" on page 7 for instructions to connect your source to the projector. 5 By default, the input source of the projector is set to VGA. Change the input source of the projector if necessary. 6 If you have multiple sources connected to the projector, press the Source button on the remote control or control panel to select the desired source. See "Using the Control Panel" on page 20 and "Using the Remote Control" on page 22 to locate the Source button. Turning Your Projector Off CAUTION: Unplug the projector after properly shutting down as explained in the following procedure. 1 Press the Power button. Follow the instruction displayed on screen to properly turn off the projector. NOTE: The "Press Power Button to Turn off Projector" message will appear on the screen. The message disappears after 5 seconds or you can press the Menu button to clear it. 2 Press the Power button again. The cooling fans continue to operate for 120 seconds. 3 To power off the projector quickly, press the Power button and hold for 1 second while the projector's cooling fans are still running. Using Your Projector 15