Dell Mobile M115HD Dell M115HD User Guide - Page 52

Problem, Projector Settings, Advanced, Settings, Possible Solution, POWER, Menu Lock

Get Dell Mobile M115HD PDF manuals and user guides View all Dell Mobile M115HD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

Problem (continued) Possible Solution (continued) Image is reversed Select Projector Settings of the Advanced Settings from the OSD and adjust the projector mode. Error LED is blinking amber A projector fan has failed and the projector will automatically shut down. TEMP LED is solid amber The projector has overheated. The display automatically shuts down. Turn the display on again after the projector cools down. If the problem persists, contact Dell. TEMP LED is blinking amber If the projector fan fails, the projector will automatically shut down. Clear the projector mode by pressing and holding the POWER button for 10 seconds. Please wait for about 5 minutes and try to power up again. If the problem persists, contact Dell. The OSD does not appear on the screen Press the Menu button on the panel for 15 seconds to unlock the OSD. Check the Menu Lock on page 34. The remote control is not operating smoothly or works only within a limited range The battery may be low. Check if the LED indication from the remote is too dim. If so, replace with a new CR2032 battery. DoUSB not displaying Display over USB Should run automatically. To manually run USB display, go to My Computer and run "USB_Display.exe". NOTE: You may require administrator level access to install the driver. Contact your network administrator for support. 52 Troubleshooting Your Projector

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Image is reversed
Problem
(continued)
Select
Projector Settings
of the
Advanced
Settings
from the OSD and adjust the
projector mode.
Possible Solution
(continued)
Error LED is blinking amber
TEMP LED is solid amber
TEMP LED is blinking
amber
The OSD does not appear
on the screen
A projector fan has failed and the projector
will automatically shut down.
The projector has overheated. The display
automatically shuts down. Turn the display
on again after the projector cools down. If
the problem persists, contact Dell.
If the projector fan fails, the projector will
automatically shut down. Clear the
projector mode by pressing and holding the
POWER
button for 10 seconds. Please wait
for about 5 minutes and try to power up
again. If the problem persists, contact Dell.
Press the Menu button on the panel for 15
seconds to unlock the OSD. Check the
Menu Lock
on page 34.
The remote control is not
operating smoothly or
works only within a limited
range
The battery may be low. Check if the LED
indication from the remote is too dim. If so,
replace with a new CR2032 battery.
DoUSB not displaying
Display over USB Should run automatically.
To manually run USB display, go to My
Computer and run "USB_Display.exe".
NOTE:
You may require administrator
level access to install the driver.
Contact your network administrator
for support.
Troubleshooting Your Projector
52