Dell Mobile M900HD Dell™ Mobile Projector (M900HD) User's Guide - Page 15
Adjusting the Projected Image, Raising the Projector Height
View all Dell Mobile M900HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
NOTE: Before you turn on the projector again, wait for 60 seconds to allow the internal temperature to stabilize. 4 Disconnect the power cord from the electrical outlet and the projector. Adjusting the Projected Image Raising the Projector Height 1 Press the Elevator button. 2 Raise the projector to the desired display angle, and then release the button to lock the elevator foot into position. Lowering the Projector Height 1 Press the Elevator button. 2 Lower the projector, and then release the button to lock the elevator foot into position. 1 2 1 Elevator button 2 Elevator foot (Angle of tilt: 0 to 9.6 degrees) Using Your Projector 15
NOTE:
Before you turn on the projector again, wait for 60 seconds
to allow the internal temperature to stabilize.
4
Disconnect the power cord from the electrical outlet and the projector.
Adjusting the Projected Image
Raising the Projector Height
1
Press the
Elevator
button.
2
Raise the projector to the desired display angle, and then release the
button to lock the elevator foot into position.
Lowering the Projector Height
1
Press the
Elevator
button.
2
Lower the projector, and then release the button to lock the elevator foot
into position.
1
2
1
Elevator button
2
Elevator foot (Angle of tilt: 0 to 9.6
degrees)
Using Your Projector
15