Dell Mobile M900HD Dell™ Mobile Projector (M900HD) User's Guide - Page 73

Problem continued, Possible Solution continued, Projector Settings of the, Advanced Settings, POWER

Get Dell Mobile M900HD PDF manuals and user guides View all Dell Mobile M900HD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 73 highlights

Problem (continued) Possible Solution (continued) Image is reversed Select Projector Settings of the Advanced Settings from the OSD and adjust the projector mode. Error LED is blinking amber A projector fan has failed and the projector will automatically shut down. TEMP LED is solid amber The projector has overheated. The display automatically shuts down. Turn the display on again after the projector cools down. If the problem persists, contact Dell. TEMP LED is blinking amber If the projector fan fails, the projector will automatically shut down. Clear the projector mode by pressing and holding the POWER button for 10 seconds. Please wait for about 5 minutes and try to power up again. If the problem persists, contact Dell. The OSD does not appear on the screen Press the Menu button on the panel for 15 seconds to unlock the OSD. Check the Menu Lock on page 30. The remote control is not operating smoothly or works only within a limited range The battery may be low. Check if the LED indication from the remote is too dim. If so, replace with a new CR2025 battery. DoUSB not displaying Display over USB Should run automatically. To manually run USB display, go to My Computer and run "USB_Display.exe". NOTE: You may require administrator level access to install the driver. Contact your network administrator for support. Troubleshooting Your Projector 73

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Problem (continued)
Possible Solution (continued)
Image is reversed
Select
Projector Settings of the
Advanced Settings
from the OSD and
adjust the projector mode.
Error LED is blinking amber
A projector fan has failed and the
projector will automatically shut down.
TEMP LED is solid amber
The projector has overheated. The display
automatically shuts down. Turn the
display on again after the projector cools
down. If the problem persists, contact
Dell.
TEMP LED is blinking
amber
If the projector fan fails, the projector will
automatically shut down. Clear the
projector mode by pressing and holding
the
POWER
button for 10 seconds. Please
wait for about 5 minutes and try to power
up again. If the problem persists, contact
Dell.
The OSD does not appear
on the screen
Press the Menu button on the panel for 15
seconds to unlock the OSD. Check the
Menu Lock
on page 30.
The remote control is not
operating smoothly or
works only within a limited
range
The battery may be low. Check if the LED
indication from the remote is too dim. If
so, replace with a new CR2025 battery.
DoUSB not displaying
Display over USB Should run
automatically. To manually run USB
display, go to My Computer and run
"USB_Display.exe".
NOTE:
You may require
administrator level access to install
the driver. Contact your network
administrator for support.
Troubleshooting Your Projector
73