Dell OptiPlex 7020 Small Form Factor Owners Manual - Page 39
Option, Description, Disabled, Every Day, Weekdays, Select Days, Auto Power is set
View all Dell OptiPlex 7020 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Option Rapid Start Technology Description • Disabled - Does not allow the TurboBoost driver to increase the performance state of the processor above the standard performance. • Enabled - Allows the Intel TurboBoost driver to increase the performance of the CPU or graphics processor. Allows you to improve batter life by automatically putting the system into a low power status during after user specified amount of time. • Intel Rapid Start feature NOTE: Rapid Start Technology will automatically be disabled due to configuration changes: • Hard Disk Configuration or partition have been changed • System or HDD password is enabled • A Dell Encryption Accelerator is installed • The Block Sleep setting is enabled Table 7. Power Management Option Description AC Recovery Specifies how the computer will respond when AC power is applied after an AC power loss. You can set the AC Recovery to: • Power Off - This option is enabled by default. • Power On • Last Power State Auto On Time Deep Sleep Control Fan Control Override This option sets the time of the day when you would like the system to turn on automatically. Time is kept in standard 12-hour format (hour:minutes:seconds). The startup time can be changed by typing the values in the time and A.M./P.M. fields. • Disabled - The system will not automatically power up. This option is selected by default. • Every Day - The system will power up every day at the time you specified above . • Weekdays - The system will power up Monday through Friday at the time you specified above. • Select Days - The system will power up on days selected above at the time you specified above. NOTE: This feature does not work if you turn off your computer using the switch on a power strip or surge protector or if Auto Power is set to disabled. Allows you to define the controls when Deep Sleep is enabled. • Disabled • Enabled in S5 only • Enabled in S4 and S5 This option is disabled by default. Controls the speed of the system fan. This option is disabled by default. NOTE: When enabled, the fan runs at full speed. 39