Dell OptiPlex 740 User's Guide - Page 123
Connect the card reader cable to the USB1 connector on the system board see System Board
View all Dell OptiPlex 740 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Installing the Media Card Reader 1 If you are installing a new media card reader: a Use a small flat-edge screw driver on the back side of the drive-panel insert to gently pop off the insert. b Remove the four shoulder screws from the drive-panel insert. 2 If you are replacing an existing media card reader: Remove the four shoulder screws from the existing media card reader. 3 Insert the four shoulder screws into the sides of the new media card reader and tighten them. 4 Attach the media card reader cable to the media card reader. 5 Connect the card reader cable to the USB1 connector on the system board (see "System Board Components" on page 102 for the connector location). 6 Align the shoulder screws with the screw guides numbered as 2, and slide the media card reader forward into the bay until it clicks into place. Desktop Computer 123