Dell PowerConnect 6224P Getting Started Guide - Page 232

www.dell.com | support.dell.com Please enter the IP address of the Management System (A.B.C.D) or wildcard (0.0.0.0) to manage from any Management Station {0.0.0.0}: 192.168.1.10 Paso 2: Now we need to configure your initial privilege (Level 15) user account. This account is used to login to the CLI and Web interface. You may set up other accounts and change privilege levels later. For more information on setting up user accounts and changing privilege levels, see the User's Guide. To set up a user account: Please enter the user name {admin}: admin Please enter the user password: ******** Please reenter the user password: ******** NOTA: si la primera entrada de contraseña y la segunda no coinciden, se solicitará al usuario que vuelva a especificarlas hasta que coincidan. NOTA: cuando finalice Easy Setup Wizard (Asistente para configuración fácil) podrá crear cuentas de usuario adicionales. Para obtener más información, consulte la Guía del usuario. Paso 3: Next, an IP address is set up. The IP address is defined on the default VLAN (VLAN #1), of which all ports are members. This is the IP address you use to access the CLI, Web interface, or SNMP interface for the switch. To set up an IP address: Please enter the IP address of the device (A.B.C.D): 192.168.1.100 Please enter the IP subnet mask (A.B.C.D or /nn): 255.255.255.0 Paso 4: Finally, set up the gateway. Please enter the IP address of the gateway from which this network is reachable (e.g. 192.168.1.1): 192.168.1.1 230 Guía de introducción