Dell PowerConnect 6224P Getting Started Guide - Page 38

www.dell.com | support.dell.com 步骤 1： The system is not configured for SNMP management by default. To manage the switch using SNMP (required for Dell Open Manage Network Manager) you can SNMP SNMP Dell Open Manage Network Manager o Set up the initial SNMP version 1 & 2 now SNMP 版本 1 和 2。） o Return later and set up other SNMP accounts. (For more information on setting up an SNMP version 3 account, see the user documentation SNMP SNMP 版本 3 Would you like to configure the SNMP management interface now SNMP Y/N y（是） To configure the SNMP management account you must specify the management system IP address and the "community string" or password that the particular management system uses to access the switch. The wizard automatically assigns the highest access level [Privilege Level 15] to this account. You can use Dell Open Manage Network Manager or other management interfaces to change this setting and to add additional management systems later. For more information on adding management systems, see the User's Guide SNMP IP 15 Dell Open Manage Network Manager To add a management station Please enter the SNMP community string to be used {Dell_Network_Manager SNMP Dell_Network_Manager}：） Dell_Network_Manager SNMP SNMPv1/2c SNMPv3 SNMPv3 ID Please enter the IP address of the Management System (A.B.C.D) or wildcard (0.0.0.0) to manage from any Management Station {0.0.0.0 IP 地址 [A.B.C.D 0.0.0.0 0.0.0.0 192.168.1.10 36