Dell PowerConnect J-SRX210 Hardware Guide - Page 36
Voice Interface Port LED
View all Dell PowerConnect J-SRX210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
PowerConnect J-SRX210 Services Gateway Hardware Guide NOTE: The numbers in Figure 8 on page 19 correspond to the numbers in Table 12 on page 20. Table 12 on page 20 describes the built-in Ethernet port LEDs. Table 12: J-SRX210 Services Gateway Built-In Ethernet Port LEDs Number Function Color State Description 1 TX/RX/LINK Green Blinking Link is active. Data LED communication is taking place. Steady Link is active. No data communication is taking place. Unlit Off Link is inactive. 2 PoE LED Green Steady PoE (Power over Ethernet) is on and the connected power device is receiving power. Yellow Steady PoE (Power over Ethernet) is on, but the connected power device is not receiving power (device fault or not enough power). Unlit Off PoE is off. NOTE: The PoE LED is enabled only on the Power over Ethernet (PoE) model of the J-SRX210 Services Gateway. For non-PoE models, the PoE LED remains off. Voice Interface Port LED On the J-SRX210 Services Gateway, each Voice Interface (FXO port and FXS port) port has a single LED indicating the status of the port. Figure 9 on page 21 shows the J-SRX210 Services Gateway Voice Interface port LEDs. 20