Dell PowerEdge 2650 Cabling Instructions for the –48 VDC - Page 4

www.dell.com | support.dell.com Input Requirements Supply voltage: Current consumption: -(48-60) VDC 8 A Kit Contents • AMP 794949-1 connector housing, or equivalent • AMP 350218-1 connector contacts, or equivalent • AMP 2-36161-5 ring-tongue terminal, or equivalent • #6-32 nut equipped with lock washer • Heat-shrink tubing Required Tools • Wire-stripper pliers capable of removing insulation from size 16 AWG solid or stranded, insulated copper wire • Three UL 1061 16 AWG black wires (-48 VDC) • Three UL 1061 16 AWG red wires (-48 VDC return) • One UL 1015 12 AWG green/yellow, green with a yellow stripe, wire (ground) • AMP 90296-2 hand-crimping tool, or equivalent • AMP 59824-1 hand-crimping tool, or equivalent • Heat gun Assembling the DC Input Power Cable CAUTION: Before connecting safety ground or power cables to the connector, ensure that the power is removed from the DC circuit. To ensure that the power is off, locate the circuit breaker on the DC source circuit. Switch the circuit breaker to the off position and, if available, install an approved safety locking device to the circuit breaker or switch, to prevent against another person energizing the circuit. 1-2 Cabling Instructions for the -48 VDC