Dell PowerEdge T310 Hardware Owner's Manual - Page 108
System Memory, General Memory Module Installation Guidelines
View all Dell PowerEdge T310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
3 Connect the system fan power cable to the system board. 4 Replace the cooling shroud. See "Installing the Cooling Shroud" on page 89. 5 Replace the expansion card stabilizer. See "Installing the Expansion Card Stabilizer" on page 87. 6 Close the system. See "Closing the System" on page 86 7 Lay the system upright on a flat surface. 8 Reattach any peripherals and connect the system to an electrical outlet. 9 Turn on the system and attached peripherals. System Memory Your system supports DDR3 registered DIMMs (RDIMMs) or unbuffered ECC DIMMs (UDIMMs). Single and dual-rank DIMMs can be 1067- or 1333-MHz, and quad-rank DIMMs can be 800- or 1067-MHz. Your system supports single-channel mode and dual-channel mode. The system contains a total of six memory sockets. UDIMM supports single-rank and dual-rank DIMMs. Only RDIMM supports quad-rank DIMMs. The maximum memory that is supported on your system varies according to the types and sizes of memory modules being used: • Single-rank and dual-rank RDIMMs of sizes 2-GB, 4-GB and 8-GB are supported for a total of up to 24 GB. • Quad-rank RDIMMs are supported for a total of up to 32 GB. • 1-GB and 2-GB UDIMMs are supported for a total of up to 8 GB. General Memory Module Installation Guidelines To ensure optimal performance of your system, observe the following general guidelines when configuring your system memory. NOTE: Memory configurations that fail to observe these guidelines can prevent your system from starting and producing any video output. • RDIMMs and UDIMMs cannot be mixed. • Except for memory channels that are unused, all populated memory channels must have identical configurations. 108 Installing System Components