Dell PowerStore 3000T EMC PowerStore Hardware Information Guide - Page 20

Table 16. 2U, 25-drive expansion enclosure dimensions and weight (continued) Dimension Value Width 44.45 cm (17.5 in) Depth 34.29 cm (13.5 in) NOTE: The weight does not include mounting rails. Allow 3.6 kg (8 lbs) for a rail set. Power requirements Power requirements will vary depending on system configuration, loading, and environmental conditions. The table below provides worst case data. To estimate power consumption values for your specific environment, go to https:// powercalculator.emc.com/. Table 17. Power requirements Requirement 1000T/ 1000X 3000T/3000X 5000T 5000X 7000T/7000X Maximum input power 240 VAC ± 10%, single phase For 100-120V, a customer-supplied step-up transformer is required 9000T/9000X AC Line Current 8.1 A (operating maximum at 200 VAC) 8.1 A 9.0 A 9.0 A 9.3 A 10.4 A Power Consumption (operating maximum at 200 VAC) 1629.6 VA (1597 W) 1629.6 VA (1597 W) 1792.9 VA (1757 W) 1792.9 VA (1757 W) 1868.4 VA (1831 W) 2088.8 VA (2047 W) Heat Dissipation 5.74 x 106 J/hr, (operating (5,449 Btu/hr) maximum) 5.74 x 106 J/hr, (5,449 Btu/hr) 6.32 x 106 J/hr, (5,995 Btu/hr) 6.32 x 106 J/hr, (5,995 Btu/hr) 6.59 x 106 J/hr, (6,248 Btu/hr) 7.37 x 106 J/hr, (6,985 Btu/hr) AC Inlet type IEC320-C14 or IEC320-C20 appliance coupler per power zone IEC320-C20 appliance coupler per power zone Normal input frequency 47 Hz-63 Hz Maximum inrush current 45 Apk "cold" per line cord at any line voltage AC protection 20 A fuse on each power supply, single line Ride-through time 10 ms min Current sharing ± 5 percent of full load, between power supplies Startup Surge Current 120 Apk "hot" per line cord, at any line voltage Table 18. High ambient temperature shutdown Ambient temperature Hardware fault Above 45° C (113° F) None Above 50° C (122° F) None Consequence Non-critical warning generated . Critical alert generated. System shuts down after five minute timer expires. If the temperature returns 20 Technical specifications