Dell PowerStore 3000X EMC PowerStore Network Configuration Guide for PowerSwit - Page 87
Table 25. Initial Configuration Worksheet blank continued, Global Storage Discovery IP Address
View all Dell PowerStore 3000X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Table 25. Initial Configuration Worksheet (blank) (continued) (Optional, Defaults to 0) Storage Network (Optional) Enables clients to access the storage in the cluster. The IP addresses in the storage network are used for iSCSI targets, iSCSI initiators, and the Global Storage Discovery IP address. If you want to enable iSCSI interfaces later or only use Fibre Channel, you can skip this step. NOTE: At a minimum, you need 6 IP addresses for each PowerStore X model appliance. However, for performance improvements, it is highly recommended that you have 10 IP addresses for each PowerStore X model appliance. 2 IPs for each PowerStore T model Appliance 6 or 10 IPs for each PowerStore X model Appliance VLAN (Optional, Defaults to 0) Netmask/Prefix Length Gateway IP Addresses Global Storage Discovery IP Address The last IP address you specify here is used as the Global Storage Discovery IP address. It is recommended that you choose to create this IP address. It is used as the single highly available floating IP address for hosts to easily discover storage from your cluster. vMotion Network Enables users to migrate virtual machines within the vSphere cluster. The IP addresses in the vMotion network are used for a dedicated network that transfer virtual machines between appliances. 2 IPs for each PowerStore X model Appliance VLAN (Optional, Defaults to 0) Netmask/Prefix Length Gateway IP Addresses Infrastructure Services Record IP addresses for your DNS and NTP servers. It is recommended that you specify at least two addresses for DNS and NTP servers each. DNS Server NTP Server Physical/Top-of-Rack Switch Information (Optional) Record the switch IP addresses to validate the cabling and switch settings before the cluster is configured. To ensure a strong layer of redundancy, it is required that you connect your appliance to at least two switches. You can provide read-only credentials for the switches. Protocol (SSH/SNMP) IP Address Port PowerStore Initial Configuration Worksheets 87