Dell Workgroup S2500 Workgroup Laser Printer S2500 Owners Manual - Page 76
Attaching directly to the network (queue), Clients, Server, Printer, Ethernet port
View all Dell Workgroup S2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
www.dell.com/supplies | support.dell.com Attaching directly to the network (queue) Server Printer Clients If you are using a Microsoft or Novell server and want to control who prints to the network printer, attach the printer through a print queue on a server. The queue setup lets you control the printer in a central location. In this section you will: • Attach cables. • Print and check the network setup page. • Assign an IP address to the printer. • Verify the IP settings. • Set up the queue on the server. • Install printer drivers for all clients connected to the server. Attach cables 1 Make sure the printer is turned off and unplugged. 2 Plug one end of a standard category 5 cable into a LAN drop or hub, and the other end into the Ethernet port (the top connector) on the back of the printer. The printer automatically adjusts for the network speed. Ethernet port 76 Setting up for network printing