Denon AVR-1911 Owners Manual - English - Page 22

Simple version Basic version Connecting a CD player • You can enjoy CD sound. • Select the connector to use and connect the device. Cables used for connections Audio cable (sold separately) Audio cable (White) L L (Red) R R CD player AUDIO AUDIO OUT LR LR LR ENGLISH Connecting an antenna Connecting an HD Radio receiver • By connecting a HD Radio antenna to this unit, you can receive HD Radio programs. • HD Radio broadcasting currentry is available in the United States and select other countries. Direction of broadcasting station FM outdoor antenna AM loop antenna (for HD Radio broadcasting, supplied) • To prevent interference, install at least 3.3 ft/1 m away from the antenna connected to the this unit's other AM tuner terminal. 75 Ω coaxial cable qw e FM indoor antenna (for HD Radio broadcasting, supplied) White Black nnUsing the AM loop antenna To use suspended on a wall Suspend directly on the wall without assembling. Nail, tack, etc. To use standing alone Use the procedure below to assemble. nnAM loop antenna assembly 1 Put the stand section through the bottom of the loop antenna from the rear and bend it forward. Loop antenna 2 Insert the projecting part into the square hole in the stand. Stand Square hole Projecting part in Set as Necessary Set this to change the digital input connector to which the input source is assigned. "Input Assign" (vpage 46) Ground AM outdoor antenna NOTE • Do not connect two FM antennas simultaneously. • Even if an external AM antenna is used, do not disconnect the AM loop antenna. • Make sure the AM loop antenna lead terminals do not touch metal parts of the panel. • If the signal has noise interference, connect the ground terminal (GND) to reduce noise. • If you are unable to receive a good broadcast signal, we recommend installing an outdoor antenna. For details, inquire at the retail store where you purchased the unit. Advanced version Information 19