Denon AVR-2802 Owners Manual - Page 24

ENGLISH 10 SURROUND Before playing with the surround function • Before playing with the surround function, be sure to use the test tones to adjust the playback level from the different speakers. This adjustment can be performed with the system setup (see page 12) or from the remote control unit, as described below. • Adjusting with the remote control unit using the test tones is only possible in the "Auto" mode and only effective in the DOLBY/DTS SURROUND modes. The adjusted levels for the different modes are automatically stored in the memory. 1 T.TONE Press the T. TONE button. (Remote control unit) 1,3 TUNING SYSTEM SETUP SURROUND PARAMETER BAND RDS MODE PTY MEMORY RT TITLE MENU/GUIDE CH SELECT ENTER SELECT STATUS ON SCREEN DISPLAY RETURN USE/LEARN T.TONE MULTI DVD SET UP 2 2 Test tones are output from the different speakers. Use the channel volume adjust buttons to adjust so that the 3 volume of the test tones is T.TONE (Remote control unit) the same for all the speakers. After completing the adjustment, press the T. TONE button again. (Remote control unit) • After adjusting using the test tones, adjust the channel levels either according to the playback sources or to suit your tastes, as described below. 1 Select the speaker whose level you want to adjust. B VOLUME LEVEL REMOTE SIGNAL SENSOR LOCK DIGITAL CH VOL CH SELECT STAND BY AUTO INPUT DIGITAL PCM ENTER (Main unit) (Remote control unit) The channel switches as shown below each time the button is pressed. FL C FR SR SB SL FADER SW When the surround back speaker setting is set to "2spkrs" for "Speaker Configuration", this is set to "SBR", "SBL". 2 Adjust the level of the selected speaker. SELECT (Main unit) Only adjustable when the channel is selected with the CH VOL buttons on the main unit. (Remote control unit) 21 4 5 6 VCR-1 7 CD CDR / TAPE CHANNEL 8 9 VCR-2/V.AUX +10 0 TV/VCR A / B 1 VOLUME DISC SKIP+ SPEAKER DOLBY / DTS SURROUND DIRECT DSP SIMULATION 5CH / 6CH STEREO INPUT MODE ANALOG STEREO EXT.IN MASTER VOL. AUDIO TAPE CDR/MD CD MULTI MUTING AVR/AVC VIDEO TUNING DVD TV VDP VCR SYSTEM SETUP SURROUND PARAMETER BAND RDS MODE PTY MEMORY RT TITLE MENU/GUIDE CH SELECT ENTER SELECT STATUS ON SCREEN DISPLAY RETURN USE/LEARN T.TONE MULTI DVD SET UP 2 NOTES: • The adjustment range for the different channels is +12 dB to -12 dB. • When using the DIRECT mode, the sound from the subwoofer can be cut by lowering the SW (subwoofer) setting one step from -12 dB (setting it to "OFF"). Fader function • This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL, SR and SB) together. Use it for example to adjust the balance of the sound from the different positions when playing multi-channel music sources. 1 Select "FADER". CH VOL CH SELECT ENTER B REMOTE SENSOR STAND BY LOCK AUTO SIGNAL DIGITAL INPUT DIGITAL PCM VOLUME LEVEL (Main unit) (Remote control unit) The channel switches in the order shown below each time this button is pressed. FL C FR SR SB SL FADER SW When the surround back speaker setting is set to "2spkrs" for "Speaker Configuration", this is set to "SBR", "SBL". 2 Press the button to reduce the volume of the front channels, the button to reduce the volume of the rear channels. The fader function does not affect the SW channel. SELECT 21 7 8 VCR-2/V.AUX +10 0 9 TV/VCR A / B 1 VOLUME DISC SKIP+ SPEAKER DOLBY / DTS SURROUND DIRECT DSP SIMULATION 5CH / 6CH STEREO INPUT MODE ANALOG STEREO EXT.IN MASTER VOL. AUDIO TAPE CDR/MD CD MULTI MUTING AVR/AVC VIDEO TUNING DVD TV VDP VCR SYSTEM SETUP SURROUND PARAMETER BAND MODE MEMORY RDS PTY RT TITLE MENU/GUIDE CH SELECT ENTER SELECT STATUS ON SCREEN DISPLAY RETURN USE/LEARN T.TONE MULTI DVD SET UP 2 (Main unit) (Remote control unit) • The channel whose channel level is adjusted lowest can be faded to -12 dB using the fader function. • If the channel levels are adjusted separately after adjusting the fader, the fader adjustment values are cleared, so adjust the fader again. This is only displayed when setting the fader control. Dolby Surround Pro Logic II mode B 1 3, 5 1, 4, 6 1 Select the Dolby Surround Pro Logic II mode. • The Dolby Pro Logic indicator lights. SURROUND MODE SELECT DOLBY / DTS SURROUND Light Display (Main unit) (Remote control unit) START SYSTEM CALL SET CALL DVD VDP 1 2 TV/DBS 4 5 VCR-1 CD 7 8 VCR-2/V.AUX +10 0 RC-904 LEARNED/TX POWER OFF ON / SOURCE TUNER 3 SHIFT PHONO 6 CDR / TAPE 9 CHANNEL TV/VCR A / B 1 VOLUME DISC SKIP+ SPEAKER DOLBY / DTS SURROUND DIRECT DSP SIMULATION 5CH / 6CH STEREO INPUT MODE ANALOG STEREO EXT.IN MASTER VOL. AUDIO TAPE CDR/MD CD MULTI MUTING AVR/AVC VIDEO TUNING DVD TV VDP VCR SYSTEM SETUP SURROUND PARAMETER BAND MODE MEMORY RDS PTY RT TITLE MENU/GUIDE CH SELECT ENTER SELECT STATUS ON SCREEN DISPLAY RETURN USE/LEARN T.TONE MULTI DVD SET UP 3 4, 5, 6 24