Denon AVR 3300 Owners Manual - Page 41

ENGLISH [4] Combining the currently playing sound with the desired image 1 Simulcast playback Use this switch to monitor a video VIDEO SELECT source other than the audio source. Press the VIDEO SELECT button repeatedly until the desired source appears on the display. * Cancelling simulcast playback. (Main unit) • Select "SOURCE" using the video select button. • Switch the program source to the component connected to the video input. [5] Checking the currently playing program source, etc. 1 On screen display • Each time an operation is performed, a description of that operation appears on the display connected to the unit's VIDEO MONITOR OUT jack. Also, the unit's operating status can be checked during playback by pressing the remote control unit's ON SCREEN button. Such information as the position of (Remote control unit) the input selector and the surround parameter settings is output in sequence. Front panel display • Descriptions of the unit's operations are also displayed STATUS on the front panel display. In STATUS addition, the display can be DISPLAY switched to check the unit's operating status while playing a source by pressing the STATUS button. (Main unit) (Remote control unit) Using the dimmer function • Use this to change the brightness of the display. The display brightness changes in four steps (bright, medium, dim and off) by pressing the remote control unit's DIMMER button repeatedly. * The brightness changes in 3 steps each time the button is pressed, and finally the display turns off. DIMMER (Main unit) Multi-source recording/playback [1] Playing one source while recording another (REC OUT mode) 1 Press the REC/MULTI button. The display switches as follows each time the button is pressed. 1 RECOUT SOURCE REC/ MULTI 1 M-SOURCE SOURCE 2 With "RECOUT SOURCE" displayed, turn the FUNCTION knob to select the source you wish to record. • The "REC" indicator and the indicator of the selected source light. (Main unit) FUNCTION (Main unit) 3 Set the recording mode. • For operating instructions, refer to the manual of the component on which you want to record. 4 To cancel, either press the REC/MULTI button or turn the function knob and select "SOURCE". FUNCTION REC/ MULTI or Display NOTES: • Recording sources other than digital inputs selected in the REC OUT mode are also output to the multi source audio output jacks. (only when "6CH In & Multi" is selected at the system setup menu's "Ext. In & Multi" setting screen) • Digital signals are not output from the REC SOURCE or audio output jacks. • Only the currently playing source can be recorded to MD/TAPE. (Main unit) (Main unit) 41