Denon DHT FS5 Owners Manual - English - Page 16

Specifications - problem

Page 16 highlights

Getting Started Installation Connections Settings Operation Other Functions Troubleshooting Specifications ENGLISH n Error Messages Display Cause Measures A signal with a sampling frequency Either switch to the input from a player with a sampling of 96 kHz (not compatible) has frequency with which the set is compatible, namely been input. 32, 44.1 or 48 kHz, or use analog connections. The set's internal circuitry is not Turn off the power, then turn it back on. If the same operating properly. error message is displayed again, contact your store of purchase for repairs. The temperature inside the set is Turn off the power and wait for a while. too high. There is a problem with the Turn off the power, then turn it back on. If is speaker connections. displayed again, contact your store of purchase for repairs. The temperature inside the set is Turn off the power and wait for a while. too high. Specifications n Front Speaker Unit Type: 1-way 6-speaker Rated output: 25 W x 4 (6 Ω/ohms) + 50 W x 1 (3 Ω/ohms) Input sensitivity: 500 mV / 22 kΩ/kohms / 250 mV / 22 kΩ/kohms (selectable) Frequency response: 80 Hz ~ 20 kHz S/N ratio: 100 dB Subwoofer preout: Output : 1 Vrms Frequency : 12 ~ 150Hz Power supply: U.S.A., Canada models : AC 120 V, 60 Hz European models : AC 230 V, 50 Hz Power consumption: When power is on : 33 W In standby : 0.5 W Speaker units: 8 cm (3-5/32") cone type x 6 Maximum external dimensions: Without feet : 750 (W) x 118 (H) x 138 (D) mm (29-17/32" x 4-41/64" x 5-7/16") With feet : 750 (W) x 140 (H) x 138 (D) mm (29-17/32" x 5-1/8" x 5-7/16") Weight: 5.1 kg (11 lbs 4 oz) n Remote Control Unit (RC-1095) Remote control method: Infrared pulse method Batteries: R03/AAA Type (two batteries) Maximum external dimensions: 49 (W) x 220 (H) x 24 (D) mm (1-59/64" x 8-21/32" x 15/16") Weight: 110 g (Approx. 4 oz) (including batteries) * For purposes of improvement, specifications and design are subject to change without notice. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17

Getting Started
Installation
Connections
Settings
Operation
Other Functions
ENGLISH
±²
n
Front Speaker Unit
Type:
1-way 6-speaker
Rated output:
25 W x 4 (6 Ω/ohms) + 50 W x 1 (3 Ω/ohms)
Input sensitivity:
500 mV / 22 kΩ/kohms / 250 mV / 22 kΩ/kohms (selectable)
Frequency response:
80 Hz ~ 20 kHz
S/N ratio:
100 dB
Subwoofer preout:
Output : 1 Vrms
Frequency : 12 ~ 150Hz
Power supply:
U.S.A., Canada models : AC 120 V, 60 Hz
European models :
AC 230 V, 50 Hz
Power consumption:
When power is on : 33 W
In standby :
0.5 W
Speaker units:
8 cm (3-5/32”) cone type x 6
Maximum external dimensions:
Without feet : 750 (W) x 118 (H) x 138 (D) mm
(29-17/32” x 4-41/64” x 5-7/16”)
With feet : 750 (W) x 140 (H) x 138 (D) mm
(29-17/32” x 5-1/8” x 5-7/16”)
Weight:
5.1 kg (11 lbs 4 oz)
n
Remote Control Unit (RC-1095)
Remote control method:
Infrared pulse method
Batteries:
R03/AAA Type (two batteries)
Maximum external dimensions:
49 (W) x 220 (H) x 24 (D) mm (1-59/64” x 8-21/32“ x 15/16”)
Weight:
110 g (Approx. 4 oz) (including batteries)
* For purposes of improvement, specifications and design are subject to change without notice.
Specifications
Display
Cause
Measures
A signal with a sampling frequency
of 96 kHz (not compatible) has
been input.
Either switch to the input from a player with a sampling
frequency with which the set is compatible, namely
32, 44.1 or 48 kHz, or use analog connections.
The set’s internal circuitry is not
operating properly.
Turn off the power, then turn it back on. If the same
error message is displayed again, contact your store of
purchase for repairs.
The temperature inside the set is
too high.
Turn off the power and wait for a while.
There is a problem with the
speaker connections.
Turn off the power, then turn it back on. If
is
displayed again, contact your store of purchase for
repairs.
The temperature inside the set is
too high.
Turn off the power and wait for a while.
n
Error Messages
Troubleshooting
Specifications