Denon DN-HC5000 Operating Instructions - Page 16

ENGLISH 3. Basic Operation (CD Player) This section describes the basic operations when connected to a DN-D4000/D4500/BU4500. PLAY and PAUSE Adjusting the pitch With Pitch slider you can adjust the playback speed (Pitch). 1. Press the PITCH button to light the PITCH LED. • Each press of the PLAY/PAUSE button switches between playback and pause. PLAY/PAUSE button illuminates solid green during playback and flashes in pause. • When the PLAY/PAUSE button is pressed during play, the DN-D4500 pauses playback at that point. Press PLAY/PAUSE button once again and playback resumes. 2. Move the Pitch Slider to adjust the pitch. The current pitch setting is displayed on the display. Pitch decreases PLAY and Cue Pitch Bend With PITCH BEND function you can change pitch temporary. DN-D4000/D4500/BU4500 has two ways for this function PITCH BEND buttons and JOG disc. 1. [PITCH BEND +/- buttons] • Press the PITCH BEND button for momentary change of pitch. While holding these buttons down, the pitch continues to change up to the limitation. • After releasing the PITCH BEND buttons, playback pitch returns to slider setting. 2. [JOG disc] • The playback speed can be changed by turning JOG disc during playback. • When the CUE button is pressed during playback, the track/file stops and returns to the original position of which playback started from, the (Cue point). This function is also called Back-Cue. With the Back-Cue function, you can start from exactly same position. The CUE button illuminates solid red when DND4000/D4500/BU4500 is ready to start playback. Pitch increases 3. The DN-D4000/D4500/BU4500 has several pitch ranges. When the RANGE button is pressed for more than 1 sec, the pitch range can be selected with the PARAMETERS knob. Select the file • When the PARAMETERS knob is pressed the pitch range is entered and the pitch range selection mode is cancelled. • Press 8 to return to the previous file. Press 9 to move ahead to the next file. Power on play 1. When the DN-D4000/D4500/BU4500's "Power On Play" presetting is set to "ON", playback starts from the beginning of the disc when the power is turned on. Relay playback For instructions on relay playback, refer to the manual of the DN-D4000/D4500/BU4500. NOTE: Some features will not be compatible with the older the DN-D4000. 12 ENGLISH