Denon DN X1700 Owners Manual - Page 15
Crossfader Start, Channel Fader Start
UPC - 883795000864
View all Denon DN X1700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Getting Started Connections Basic Operations Effector Function Fader Start USB Utility Specifications Troubleshooting Setting the beat 1 Press the BEAT , buttons to set the number of beats. 2 When the TIME button is pressed, the mode is changed to the time input mode. The time can be adjusted by pressing the BEAT , buttons. 3 When the TIME button is pressed again, the number of beats setting mode is restored. Fader Start Channel Fader Start 1 Using the channel input source selector controls (SOURCE SEL LN1/LN2/LN3/LN4/D1-4/USB), select the desired source from LINE1 CD, LINE2 CD, LINE3 CD or LINE4 CD. 2 Turn on the CH FADER START switch. Selecting the effects 3 Move the Channel input fader (CH FADER) of CH-1, CH-2, CH-3 or CH-4 control all the way to the bottom. 4 Turn the EFX SELECT controls to select the effect, and press the control to enter the desired effect. Set the standby mode on CD player. Turning the effects ON and OFF When the Effect ON/OFF buttons are pressed, the effect is turned ON or OFF. 5 When you want to start the player, move up the Channel input fader (CH FADER) and the CD player will begin playing. Crossfader Start 1 Using the channel input source selector controls (SOURCE SEL LN1/LN2/LN3/LN4/D1-4/USB), select the desired source from LINE1 CD, LINE2 CD, LINE3 CD or LINE4 CD. 2 Set the CROSSFADER ASSIGN switches (A/THRU/B) to A or B. 3 Turn on the CROSSFADER START switches. 4 Slide the Crossfader all the way in direction opposite the source you want to start. (In the following example, startup is done with the CD player connected set to Assign A.) 5 Set the standby mode on CD player. 6 Use the CROSSFADER CONTOUR control to control the cross fader startup curve. 7 When the Crossfader is slid in the opposite direction, CD player play will begin. 11