Denon DN X1700 Owners Manual - Page 16

Getting Started Connections Basic Operations Effector Function Fader Start USB Utility Specifications Troubleshooting FADER (setting the fader curve) How to adjust the Crossfader torque 1 Channel Fader When the CH FADER CONTOUR control is turned counterclockwise, the curve will have characteristics that rise gradually; conversely, when it is turned clockwise, it will have characteristics that rise sharply. At the center position, curve characteristics between the two will be produced. * The same curve characteristics apply to channels 1 to 4. 2 Crossfader When the CH FADER CONTOUR control is turned counterclockwise, the curve will have characteristics that will rise gradually; conversely, when it is turned clockwise, it will have characteristics that rise sharply, and cut-in and cut-out operations will be performed. At the center position, curve characteristics between the two will be produced. 1 Remove the rubber cap of the front panel. 2 Move the Crossfader to the far right until the screw head becomes visible. 3 Insert a screwdriver, and adjust the sliding torque. When the screw is turned clockwise: The sliding torque is increased so that the Crossfader moves more stiffly. When the screw is turned counterclockwise: The sliding torque is decreased so that the Crossfader moves more easily. 4 Put the rubber cap of the front panel back in its place. NOTE • The Crossfader has a high-precision construction: As such, tightening the screw with too much force or loosening it excessively may result in damage or adversely affect performance. 12