Denon DN X1700 Owners Manual - Page 22
Preset Import, Preset Recall, Preset Export
UPC - 883795000864
View all Denon DN X1700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Getting Started Connections Basic Operations Effector Function Fader Start USB Utility Specifications Troubleshooting Owner Setting Mode When the POWER switch is set to the ON position while the UTILITY/-USB A/USB B button is held down, the Owner Setting mode is established, and the settings listed below can be selected. To release the Owner Setting mode, set the POWER switch to the OFF position. Parameter Value 1. Limiter OFF / ON 2. Limiter Threshold 20dB to 10dB 3. Digital Output FS INT / 44.1kHz / 48kHz / 96kHz 4. Power ON USB Mode USB A / USB B 5. Preset Import Exit / Execute*1 6. DN-X1700 Initalize Exit / Execute*2 Default OFF 20dB 44.1kHz USB A - *1: Using the Preset stored externally, the internal memory is updated, and the settings are reflected in the device. *2: All the Owner settings and Preset are set to the factory settings. Preset Export 1 Connect the USB memory device to the unit and, using the Utility settings, execute Preset Export. 2 The Preset statuses are written into the USB memory device. * If the export file already exists, a screen prompting the user to verify whether the file is to be overwritten appears. Preset Recall 1 Insert the USB memory device with the export files into the DN-X1700 or turn on the unit's power with the device already inserted. 2 A screen prompting the user to verify whether the presets are to be called appears. 3 When OK is selected, the preset Audio Setting and MIDI Setting of the export file are called. (The preset information stored inside the DN-X1700 is not updated.) 4 When the USB memory device is ejected, a screen prompting the user to verify whether to return to the status before the presets were called appears. (Cancel cannot be selected.) 5 When OK is selected, the presets are restored to the status before they were called. * After the presets are called, they are retained while the unit remains connected to the computer even if the USB B mode is selected. Preset Import 1 In the Owner Setting mode, insert the USB memory device with the export files into the DN-X1700 or establish the Owner Setting mode with the device already inserted. 2 A screen prompting the user to verify whether the preset memory is to be updated appears. 3 When OK is selected, the contents of the preset memory are updated to the contents of the export files. * Bear in mind that the data prior to the updating will not be retained. 18