Denon DRA-697CI Owners Manual - English - Page 23

Operation FUNCTION FUNCTION [MODE SELECTOR 1] [ZONE2 ON] [ZONE2 OFF] FUNCTION [MAIN ON/OFF] [CHANNEL] [VOLUME] [MODE SELECTOR 2] [ZONE3 OFF] [ZONE3 ON] ENGLISH Outputting a program source to amplifier, etc., in the ZONE2 (or ZONE3) room (ZONE2 or ZONE3 SELECT mode) 1 Press to select "M-ZONE". M-ZONE RECOUT 2 Use FUNCTION to select the source you want to output appears on the display. • The " " indicator and the indicator for the selected source light. 3 Start playing the source to be output. For operating instructions, refer to the manuals of the respective components. Operation Remote control unit operations during multisource playback 1 Set [MODE SELECTOR 1] to the "B". 2 Set [MODE SELECTOR 2] to the "ZONE2" or "ZONE3". 3 Press [ZONE2 (ZONE3) ON] to turn on the zone power. To cancel the ZONE2 or ZONE3 mode: Press [ZONE2 OFF] or [ZONE3 OFF]. 4 Use [FUNCTION] to select the input source you wish to output. • The " " indicator and the indicator for the selected source light. • The signals of the source selected in the ZONE mode are also output from the VCR and CD-R/TAPE recording output terminals. The MULTI ZONE source switches directly. When the MULTI ZONE SOURCE function is set to "FM/AM", the preset channel can be selected pressing [CHANNEL]. 5 The volume of the outputs of the different zones can be adjusted with [VOLUME]. Default volume setting ZONE2/ZONE3 : - - - dB (Minimum) The zone volume can be adjusted within the range of -80 to 18 dB, in steps of 0.5 dB. • When using ZONE2 or ZONE3, it is possible to turn the power for the MAIN ZONE only on or off by pressing [MAIN ON/OFF]. About the button names in this explanation < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only : Buttons on the main unit and remote control unit 20 ENGLISH