Denon DRA-697CI Owners Manual - English - Page 24

ENGLISH Operation FUNCTION FUNCTION [MODE SELECTOR 1] [ZONE2 OFF] [NUMBER] (0 ~ 9, +10) [A] FUNCTION Recording (audio and/or video) 1 Press until "RECOUT" appears on the display. M-ZONE RECOUT Operation About the memory functions ¢ Last function memory The various settings set when the DRA-697CI's power is switched to standby are stored in the memory. When the power is turned back on, the settings made when the power was switched to standby are recalled. [MODE SELECTOR 2] 2 Use FUNCTION to select the source to be recorded (audio and/or video). • The " " indicator lights. 3 Record (the audio or video signals). For operations, see the operating instructions of the device from which you are recording (audio or video signals). • To cancel, press and set the function to "ZONE". NOTE: • When the REC OUT mode is selected, FUNCTION (ZONE) cannot be operated. ¢ Backup memory The various settings are stored in the memory for about 1 week, even when the power is turned off or the power cord is unplugged. Initialization of the microprocessor If the indication on the display is not normal or if the operation of the unit is not correct, then the microprocessor should be reset by the following procedure. 1 Switch off the unit using . 2 Press and hold in , and simultaneously until "PLEASE WAIT" is displayed. • The microprocessor will be initialized. [ZONE3 ON] [D] • If step 2 does not work, start over from step 1. • If the microprocessor has been reset, all the button settings are reset to the default values (the values set upon shipment from the factory). About the button names in this explanation < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only : Buttons on the main unit and remote control unit 21 ENGLISH