Dymo LabelWriter SE450 Label Printer Technical Reference - Page 35
ESC X Set Horizontal Starting Position, ESC Y Set Vertical Starting Position
View all Dymo LabelWriter SE450 Label Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Commands n2 are received successfully by the host, you can be reasonably assured that there is a LabelWriter printer attached connected and your program can communicate with the printer. Expression ASCII ESC W n1 n2 Decimal 27 87 n1 n2 Hex 1B 57 n1 n2 Parameters n1 first character to echo n2 second character to echo ESC X Set Horizontal Starting Position Description This command is used in landscape printing to set a new offset from the left margin from which to begin printing text and barcode objects. Distance is specified in dots (1 dot = 1/203 of an inch). The n1 and n2 parameters are evaluated to form a 16-bit word as follows: first, the n1 parameter's decimal value is multiplied by 256, then the result is added to the decimal value of the n2 parameter. Expression ASCII ESC X n1 n2 Decimal 27 88 n1 n2 Hex 1B 58 n1 n2 Parameters n1 high-order byte of 16-bit word that specifies distance n2 low-order byte of 16-bit word that specifies distance ESC Y Set Vertical Starting Position Description 29