Dymo LabelWriter SE450 Label Printer Technical Reference - Page 38
FF Form Feed
View all Dymo LabelWriter SE450 Label Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Command Reference 16 white pixels 16 printed pixels Total 192 pixels = 24 bytes x 8 Using the ETB command, along with the ESC D and ESC B commands, can drastically reduce the number of data bytes required to form a print image. Refer to the description of the SYN command for more information on printing bitmap data. See Also SYN ESC B ESC D Expression ASCII ETB d1...dn Decimal 23 d1...dn Hex 17 d1...dn Parameters d1...dn n bytes of bitmap print data as per ESC D setting. FF Form Feed Description Prints the contents of the text buffer and advances the print media. The distance the media will advance depends on two factors: the feed distance specified by the GS L command and the presence of a punch hole. The LabelWriter printer will advance until a punch hole is detected or until the feed distance (specified by the GS L command) has been reached. When the printer is powered on, the feed distance stored in flash memory is used as the default distance; the factory default is 7.5 inches. A new feed distance specified by the GS L command will override the flash memory setting until the printer is either powered down or a reset command is issued (by the ESC @ or ESC * command). The FF and ESC E commands are the same and produce the same result. See Also ESC E Expression ASCII FF Decimal 12 Hex 0C Parameters 32