Dynex DX-LCD26-09 User Manual (English) - Page 9

Using your TV 9 Changing channels To change channels: • Press CH or CH on the remote control to go to the next lower or higher channel. Or Press the number buttons to directly select a channel (for example, if you want channel 83, press 8, then press 3). Or Press RECALL to go to the last viewed channel. Selecting a digital sub-channel Most digital TV channels have more than one channel. The main channel carries the signal for the main TV program. The sub-channels carry signals for additional or alternate programming, such as a radio or news broadcast. For example, if the main channel number is 8, the sub-channel number might be 8-1, 8-2, or 8-3. To select a sub-channel: 1 Press the number buttons for the main channel (for example 8). 2 Press -, then press the sub-channel button (for example 1). Adjusting the volume To adjust the volume: • Press VOL - or VOL + to decrease or increase the volume. • Press MUTE to turn off the sound. Press MUTE again to turn the sound back on. Displaying status information To display status information: • Press DISPLAY. Your TV displays status information, such as the channel number or signal source. Checking the DTV signal strength To check the DTV signal strength: 1 Press MENU. The on-screen display menu opens with Setup highlighted. 2 Press to enter the sub-menu, then press or to highlight DTV Signal. The DTV signal meter opens. Adding a channel label To add a label to a channel: 1 Press MENU. The on-screen display menu opens with Setup highlighted. 2 Press to enter the sub-menu, then press or to highlight Channel Labels. The Channel Label menu opens. 3 Press or to move the cursor to the channel field, then press or to select a channel. 4 Press or to move the cursor to the label field, then press or to select the character. 5 Press ENTER to return to the previous menu. Freezing the picture You can freeze (still) the screen image. Caution: To protect your TV, do not freeze the screen image for long periods of time. To freeze or unfreeze the picture: • Press FREEZE. Setting the clock To set the clock: 1 Press MENU. The on-screen display menu opens with Setup highlighted. 2 Press or repeatedly to highlight Feature. The Feature menu opens. ENTER 3 Press to enter the sub-menu, then press or to highlight Time Set. The Time Set menu opens. 3 Press MENU or EXIT to close the menu. 4 Press or move to the different fields, then press or to change the settings. 5 Press MENU or EXIT to close the menu.