EVGA 121-BL-E756-TR User Manual - Page 58
Rank Interleave Setting, tCL Setting, tRCD Setting, tRP Setting, tRAS Setting, Command Rate
View all EVGA 121-BL-E756-TR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Configuring the BIOS Rank Interleave Setting This function is allows you to select the Rank Interleave Setting. The options are 1 way, 2 way and 4 way. tCL Setting This function is set the CAS latency. The options are 0 through 18. tRCD Setting This function is set the RAS to CAS Delay for Read/Write commands to the same bank. The options are 0 through 15. tRP Setting This function is set the Row Precharge time. This is the Precharge-to-Active or Auto-to-Refresh of the same bank. The options are 0 through 15. tRAS Setting This function is set the minimum RAS# active time. The options are 0 through 31. Command Rate This function is set the command timing setting on a per clock unit basis. The options are Auto, 1T and 2T. 59
Configuring the BIOS
59
Rank Interleave Setting
This function is allows you to select the Rank Interleave Setting. The options
are 1 way, 2 way and 4 way.
tCL Setting
This function is set the CAS latency. The options are 0 through 18.
tRCD Setting
This function is set the RAS to CAS
Delay for Read/Write commands to the
same bank. The options are 0 through 15.
tRP Setting
This function is set the Row Precharge time. This is the Precharge-to-Active
or Auto-to-Refresh of the same bank. The options are 0 through 15.
tRAS Setting
This function is set the minimum RAS# active time. The options are 0
through 31.
Command Rate
This function is set the command timing setting on a per clock unit basis.
The options are Auto, 1T and 2T.