EVGA 122-M2-NF59-TR User Manual - Page 10
Hardware Installation, Hardware Installation Steps, Checking the Motherboard's Jumper Settings, CMOS
View all EVGA 122-M2-NF59-TR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Hardware Installation Hardware Installation Steps Before using your computer, please complete the following steps: 1. Check motherboard jumper settings 2. Install CPU and Fan 3. Install System Memory (DIMM) 4. Install Expansion cards 5. Connect IDE and Floppy cables, Front /Back Panel cables 6. Connect ATX Power cable 7. Power-On and Load Standard Default BIOS Settings 8. Reboot 9. Install Operating System 10. Install Motherboard Drivers and Utilities Checking the Motherboard's Jumper Settings CMOS RAM Clear (3-pin) : JBAT A battery must be used to retain the motherboard configuration in CMOS RAM short 1-2 pins of JBAT to store the CMOS data. To clear the CMOS, follow the procedure below: 1. Turn off the system and unplug the AC power 2. Remove the ATX power cable from the ATX power connector 3. Locate JBAT and short pins 2-3 for a few seconds 4. Return JBAT to its normal setting by shorting pins 1-2 5. Connect the ATX power cable back to the ATX power connector 1 3 JBAT 1 3 JBAT 1-2 closed Normal 2-3 closed Clear CMOS CMOS RAM Clear Setting EVGA Corporation 2900 Saturn St. Suite B, Brea, CA 92821 Phone: 888 / 881-EVGA - 714 / 528-4500 - Fax: 714 / 528-4501 Page 9