EVGA 141-BL-E760-A1 User Guide - Page 19

Connecting Cables and, Setting Switches

Get EVGA 141-BL-E760-A1 - X58 Classified SLI Mainboard PDF manuals and user guides
UPC - 843368010157
View all EVGA 141-BL-E760-A1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

EVGA X58 SLI CLASSIFIED Motherboard Securing the Motherboard into the Chassis Most computer chassis have a base with mounting studs or spacers to allow the mother board to be secured to the chassis and help to prevent short circuits. If there are studs that do not align with a mounting hole on the motherboard, it is recommended that you remove that stud to prevent the possibility of a short circuit. In most cases, it is recommended to secure the motherboard using a minimum of nine (9) spacers. 1. Carefully place the motherboard onto the studs/spacers located inside the chassis. 2. Align the mounting holes with the studs/spacers. 3. Align the connectors to the I/O shield. 4. Ensure that the fan assembly is aligned with the chassis vents according to the fan assembly instruction. 5. Secure the motherboard with a minimum of nine screws. Connecting Cables and Setting Switches This section takes you through all the connections and switch settings necessary on the motherboard. This will include:  Power Connections  24-pin ATX power (PW1)  8-pin ATX 12V power (PW12-1, PW12-2)  Internal Headers  Front panel  IEEE 1394a  USB Headers  Audio  IDE 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
EVGA X58 SLI CLASSIFIED Motherboard
21
Securing the Motherboard into the Chassis
Most computer chassis have a base with mounting studs or spacers to allow the
mother board to be secured to the chassis and help to prevent short circuits. If
there are studs that do not align with a mounting hole on the motherboard, it is
recommended that you remove that stud to prevent the possibility of a short
circuit. In most cases, it is recommended to secure the motherboard using a
minimum of nine (9) spacers.
1.
Carefully place the motherboard onto the studs/spacers located inside the
chassis.
2.
Align the mounting holes with the studs/spacers.
3.
Align the connectors to the I/O shield.
4.
Ensure that the fan assembly is aligned with the chassis vents according to
the fan assembly instruction.
5.
Secure the motherboard with a minimum of nine screws.
Connecting Cables and
Setting Switches
This section takes you through all the connections and switch settings necessary
on the motherboard. This will include:
Power Connections
24-pin ATX power (
PW1
)
8-pin ATX 12V power (
PW12-1, PW12-2
)
Internal Headers
Front panel
IEEE 1394a
USB Headers
Audio
IDE