Edimax BR-6208ACD User Manual - Page 60
L2TP Gateway
View all Edimax BR-6208ACD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Static IP Address Subnet Mask Default Gateway Address MAC Address DNS Address DNS Address 1,2 & 3 Enable Dual-WAN Access User ID Password L2TP Gateway Connection ID MTU Connection Type Input the IP address assigned by your ISP here. Input the subnet mask assigned by your ISP here. Input the default gateway assigned by your ISP here. Some ISPs may call this "Default Route". If your ISP filters access by MAC addresses, enter your computer's MAC address here. Click "Clone MAC" to automatically enter your computer's MAC address. Select "Obtain an IP address automatically" or "Use the following IP address". Check with your ISP if you are unsure. Enter the DNS address(es) assigned by your ISP here. Enable/disable dual WAN access. When you enable dual WAN access, select an IGMP source and enter a "Host Name" and "MAC Address". Input the user name assigned by your ISP here. Input the password assigned by your ISP here. Input the L2TP gateway assigned by your ISP here. Specify a reference name/ID for the connection. Enter the maximum transmission unit (MTU) value of your network connection. The default value is 1392. Specify a connection type: Idle Time Out 1. "Continuous": Connected all the time. 2. "Connect on Demand": Connect when you initiate an Internet connection. 3. "Manual": Connect/disconnect manually using the "Connect" and "Disconnect" buttons. Specify the amount of time the router waits before shutting down an idle connection. Only available when "Connect on Demand" (above) is selected. 56