Edimax BR-6208ACD User Manual - Page 63
III-3-4., IP Address, Subnet Mask, 1d Spanning, DHCP Server, Lease Time
View all Edimax BR-6208ACD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
III-3-4. LAN You can configure your Local Area Network (LAN) on this page. You can enable the router to dynamically allocate IP addresses to your LAN clients, and you can modify the IP address of the device. The device's default IP address is 192.168.2.1. You can access the browser based configuration interface using the device's IP address instead of using the URL http://edimax.setup. IP Address Subnet Mask 802.1d Spanning Tree DHCP Server Lease Time Specify the IP address here. This IP address will be assigned to the BR-6208ACD and will replace the default IP address. Specify a subnet mask. The default value is 255.255.255.0 Select "Enable" or "Disable" to enable/disable 802.1d Spanning Tree. This creates a tree of connected layer-2 bridges (typically Ethernet switches) within a mesh network, and disables those links that are not part of the tree, leaving a single active path between any two network nodes. Enable or disable the DHCP server. Select a lease time for the DHCP leases here. The DHCP client will obtain a new IP address after the period expires. Your device's DHCP server automatically assigns IP addresses to computers on its network, between a defined range of numbers. 59