Edimax BR-6428HPn Manual

Edimax BR-6428HPn Manual

Get Edimax BR-6428HPn PDF manuals and user guides View all Edimax BR-6428HPn manuals
Add to My Manuals
Save this manual to your list of manuals

Edimax BR-6428HPn manual content summary:

  • Edimax BR-6428HPn | Manual - Page 1
    BR-6428HPn User Manual 05-2012 / v1.0
  • Edimax BR-6428HPn | Manual - Page 2
    entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Edimax Technology Co., Ltd. reserves about this product, please refer to the user manual on the CD‐ROM. The software and specifications are subject to change without notice
  • Edimax BR-6428HPn | Manual - Page 3
    CONTENTS CHAPTER I: PRODUCT INFORMATION ...4 1‐1 Package Contents ...4 1‐2 Getting Familiar with Your New Wireless Broadband Router 4 CHAPTER II: SYSTEM AND NETWORK SETUP ...6 2‐1 Establishing a Network Connection...6 2‐2 Setting Client Computers to Obtain IP Addresses Automatically 7 2‐2‐1
  • Edimax BR-6428HPn | Manual - Page 4
    3‐4‐2‐4 WPA RADIUS...49 3‐4‐3 MAC Address Filtering ...50 3‐4‐4 WPS (Wi‐Fi Protected Setup) Settings 52 3‐5 Advanced Settings ...53 3‐5‐1 QoS ...53 3‐5‐2 DDNS...55 3‐5‐3 Port Forwarding...57 3‐5‐4 DMZ ...58 3‐6 NAT ...60 3‐6‐1 Virtual Server ...60 3‐6‐2 Special Applications ...61 3‐6‐3 UPnP
  • Edimax BR-6428HPn | Manual - Page 5
    package, and contact your dealer to claim the missing item(s): z Broadband router (1 pcs) z Quick installation guide (1 pcs) z 3dBi antenna (2 pcs) z CD with multi‐language QIG and user manual (1 pcs) z 12V DC power adapter (1 pcs) z Ethernet cable (1 pcs) z Power adapter (1 pcs) z Vertical stand
  • Edimax BR-6428HPn | Manual - Page 6
    Back Panel Item Name Antenna connector(s) Wi‐Fi on/off switch WPS/Reset Button 1‐4 (LAN Ports) WAN Port Power Connector Description Connects to the supplied antenna(s) Switches on/off the Wi‐Fi signal Resets the router to factory default settings or starts WPS function (press this button and hold
  • Edimax BR-6428HPn | Manual - Page 7
    CHAPTER II: SYSTEM AND NETWORK SETUP 2‐1 Establishing a Network Connection Please follow the following instructions to build a network connection between your new broadband router, computers, and other network devices: 1. Connect your xDSL or cable modem to the router's "WAN" port
  • Edimax BR-6428HPn | Manual - Page 8
    the computer is connected and correctly powered. If you encounter any problems, please make sure that all your devices are connected and powered a static IP address, or if you are unsure, please follow the following instructions to configure your computer to use dynamic IP addresses: z Windows 95/98
  • Edimax BR-6428HPn | Manual - Page 9
    2. Select "Obtain an IP address from a DHCP server", then click "OK". 2‐2‐2 Windows 2000 IP Address Setup 1. Click the "Start" button (it should be located at the lower‐left corner of your screen), then click "Control Panel". Double‐click the "Network and Dial‐up Connections" icon, and then double‐
  • Edimax BR-6428HPn | Manual - Page 10
    "Local Area Connection Properties" window appears, select "Internet Protocol (TCP/IP)", and then click "Properties". 2. Select "Obtain an IP address automatically" and "Obtain DNS server address automatically", then click "OK". 2‐2‐3 Windows XP IP Address Setup 1. Click the "Start" button (it should
  • Edimax BR-6428HPn | Manual - Page 11
    Connection". When the "Local Area Connection Properties" window appears, click "Properties". 2. Select "Obtain an IP address automatically" and "Obtain DNS server address automatically", then click "OK". 2‐2‐4 Windows Vista IP Address Setup 1. Click the "Start" button (it should be located at the
  • Edimax BR-6428HPn | Manual - Page 12
    select "Properties". When the "Local Area Connection Properties" window appears, select "Internet Protocol Version 4 (TCP/IPv4)" and then click "Properties". 2. Select "Obtain an IP address automatically" and "Obtain DNS server address automatically", then click "OK". 11
  • Edimax BR-6428HPn | Manual - Page 13
    2‐3 Connecting to Broadband Router via Web Browser You can access the broadband router's web‐based configuration interface via any connected computer with a web browser (Internet Explorer 5.x or above, Firefox, Opera, or Safari). 1. Please input "192.168.2.1" in the web browser's address bar and
  • Edimax BR-6428HPn | Manual - Page 14
    all the current settings and other system information here. System Model Displays this broadband router's model name (useful when you need technical service) Up Time Displays the amount of time this router has been switched on Hardware Version Displays this broadband router's hardware version
  • Edimax BR-6428HPn | Manual - Page 15
    , and the runtime code is always displayed on the top of the webpage. If this router's DHCP server function is enabled, please follow the following instructions to find this router's IP address: 1. Click the "Start" button, then click "Run". 14
  • Edimax BR-6428HPn | Manual - Page 16
    2. Input "cmd", and then click "OK". 3. Input "ipconfig", then press "Enter". Use the IP address following "Default Gateway" to access this router's web‐based configuration interface. Please note that the IP address you find may be different from this illustrated example. NOTE: If there is no IP
  • Edimax BR-6428HPn | Manual - Page 17
    iQ Setup" and it will start detecting your Internet service type. Note: Your computer or iPhone can also use iQ Setup with a Wi‐Fi connection. Please make sure you have connected to the correct Wi‐Fi network. The router's default SSID is "Edimax". Dynamic IP If your Internet connection type is
  • Edimax BR-6428HPn | Manual - Page 18
    Note: For security reasons, Edimax suggests that you set up the wireless security. If you click "Yes (recommended)", you will be asked to enter an SSID and a password (at least 8
  • Edimax BR-6428HPn | Manual - Page 19
    Note: For security reasons, Edimax suggests that you set up the wireless security. If you click "Setup wireless security (recommended)", you will be asked to enter an SSID and a password (
  • Edimax BR-6428HPn | Manual - Page 20
    19
  • Edimax BR-6428HPn | Manual - Page 21
    in. 2. All available setup items will appear under the "General Setup" tab. 3. Refer to the following list for further instructions: z System z WAN z LAN z Wireless z Advance Settings z NAT z Firewall z Parental Control (See section 3‐1) (See section 3‐2) (See section 3‐3) (See section 3‐4) (See
  • Edimax BR-6428HPn | Manual - Page 22
    country or region. If you cannot find your country/region, please select another country/region whose time zone is the same as yours. This router supports NTP (Network Time Protocol) for automatic time and date setup. Input the host name or IP address of the NTP server here. If you do
  • Edimax BR-6428HPn | Manual - Page 23
    Click "Apply" to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 3‐1‐2 Password Settings You can change the router's default login password ("1234") here. It is advised to do so to prevent
  • Edimax BR-6428HPn | Manual - Page 24
    3‐1‐3 Remote Management Setting up the "Remote Management" function allows you to manage this broadband router from outside your local area network (from the Internet). Item Name Host Address Port Enabled Description Assign an IP address with which to access this router remotely. Assign a port
  • Edimax BR-6428HPn | Manual - Page 25
    save the changes. If you are not sure which connection type you should use, please contact your Internet service provider for help. 3‐2‐1 Dynamic IP If your Internet service provider assigns IP addresses to you automatically through DHCP (Dynamic Host Configuration Protocol), select "Dynamic IP". 24
  • Edimax BR-6428HPn | Manual - Page 26
    Item Name Host Name MAC Address DNS Address DNS Address 1 and 2 TTL Description Input the host name of your computer here. This is optional and only required if your ISP asks you to do so. If your ISP only permits computers with certain MAC addresses to access the Internet, input your computer's
  • Edimax BR-6428HPn | Manual - Page 27
    Item Name Fixed IP Address Subnet Mask DNS Address 1 and 2 Default Gateway TTL Description Input the IP address assigned by your ISP here. Input the subnet mask assigned by your ISP here. Enter the primary and secondary DNS addresses assigned by your ISP here. Input the default gateway assigned by
  • Edimax BR-6428HPn | Manual - Page 28
    "TTL" function if your ISP requires you to do so. Give this Internet service a name (optional). Input the MTU value of your network connection here. If " only connects to the Internet when you initiate Internet connection. 3. "Manual" connects to the Internet only when the "Connect" button on this
  • Edimax BR-6428HPn | Manual - Page 29
    Idle Time Out Enable Dual‐WAN Access Specify the amount of time the router waits before shutting down an idle connection. This option is only available when "Connect on Demand" is selected. Check the "Enable Dual‐WAN Access" box if your ISP requires you to do so. Click "Apply" to save the changes.
  • Edimax BR-6428HPn | Manual - Page 30
    . Check the "Enable Dual‐WAN Access" box if your ISP requires you to do so. NOTE: These settings must be configured according to your Internet service. Please contact your Internet service provider if you are not sure what to select. Configure the "PPTP Settings" section. 29
  • Edimax BR-6428HPn | Manual - Page 31
    . Check the "Enable" box if you are in Israel and using BEZEQ network services. Please specify a connection type here. There are 3 options: Idle Time Out " only connects to the Internet when you initiate Internet connection. 3. "Manual" connects to the Internet only when the "Connect" button on this
  • Edimax BR-6428HPn | Manual - Page 32
    . Check the "Enable Dual‐WAN Access" box if your ISP requires you to do so. NOTE: These settings must be configured according to your Internet service. Please contact your Internet service provider if you are not sure what to select. Configure the "L2TP Settings" section. 31
  • Edimax BR-6428HPn | Manual - Page 33
    keeps the Internet connection alive all the time. 2. "Connect on Demand" only connects to the Internet when you initiate Internet connection. 3. "Manual" connects to the Internet only when the "Connect" button on this page is clicked, and disconnects when the "Disconnect" button is clicked. Specify
  • Edimax BR-6428HPn | Manual - Page 34
    the list, and click "Done" to establish a connection. Clicking "Refresh" will renew the list. Configure the security settings in accordance to your Internet service provider's requirements. Click "Apply" to save the changes. After you have clicked "Apply", you will see the following message: 33
  • Edimax BR-6428HPn | Manual - Page 35
    " to configure other settings. 3‐3 LAN You can configure your local area network under "LAN". Refer to the following list for further instructions: z LAN IP (See section 3‐3‐1) z DHCP Server (See section 3‐3‐2) z Static DHCP Leases (See section 3‐3‐3) 3‐3‐1 LAN IP You can assign the LAN
  • Edimax BR-6428HPn | Manual - Page 36
    broadband router with less than 30 computers. If you are not sure what to fill, here are some recommended values: z IP Address: "192.168.1.254" z Subnet Mask: "255.255.255.0" z 802.1d Spanning Tree: "Disabled" z DHCP Server: "Enabled" z Lease Time: "Two Weeks" or "Forever" 3‐3‐2 DHCP Server You can
  • Edimax BR-6428HPn | Manual - Page 37
    Item Name Enable Static DHCP Leases MAC Address IP Address Add Clear Description Check this box to enable the function. Input the specified computer's MAC address here. Assign a fixed IP address for the specified computer here. After you have entered the MAC address and the IP address, click "Add"
  • Edimax BR-6428HPn | Manual - Page 38
    Click "Apply" to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 3‐4 Wireless You can set up the 2.4GHz wireless LAN connection under "Wireless". 3‐4‐1 Wireless Settings Basic 2.4GHz
  • Edimax BR-6428HPn | Manual - Page 39
    z AP Bridge-WDS: Connects this router with up to 4 WDS‐capable broadband routers z Universal Repeater: Repeats another wireless access point's signal to extend its wireless signal coverage 3‐4‐1‐1 AP Mode The following settings will appear in "AP" mode: Item Name Band ESSID Channel Number
  • Edimax BR-6428HPn | Manual - Page 40
    Associated Clients select the channel of your preference (1 to 13). Click "Show Active Clients" for the list of all connected wireless clients. Click "Refresh" in the new window to renew the list, and click "Close" to close the window. Wireless Module Note: If you have a pop‐up blocker installed,
  • Edimax BR-6428HPn | Manual - Page 41
    Item Name Band Description Select from one of the following options: 2.4GHz (B): Allows this router to connect to 802.11b wireless network servers (maximum transfer rate 11Mbps). 2.4GHz (N): Allows this router to connect to 802.11n wireless network servers (maximum transfer rate 150Mbps). 2.4GHz
  • Edimax BR-6428HPn | Manual - Page 42
    act as a wireless bridge only. It will not accept other wireless clients. If you wish to use this function with a wireless access point that supports WDS, please select "AP Bridge-WDS" mode. Item Name Band Description Select from one of the following options: 2.4GHz (B): Allows 802.11b wireless
  • Edimax BR-6428HPn | Manual - Page 43
    will act as a wireless bridge only. It will not accept other wireless clients. If you wish to use this function with a wireless access point that supports WDS, please select "AP Bridge-WDS" mode. 42
  • Edimax BR-6428HPn | Manual - Page 44
    Item Name Band Description Select from one of the following options: 2.4GHz (B): Allows 802.11b wireless network clients to connect to this router. 2.4GHz (N): Allows 802.11n wireless network clients to connect to this router. 2.4GHz (B+G): Allows 802.11b and 802.11g wireless network clients to
  • Edimax BR-6428HPn | Manual - Page 45
    Click "Apply" to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 3‐4‐1‐5 AP Bridge-WDS In "AP Bridge-WDS" mode, this broadband router acts as both a wireless communication bridge and a
  • Edimax BR-6428HPn | Manual - Page 46
    network clients to connect to this router. 2.4GHz (G): Allows 802.11g wireless network clients to connect to this router. ESSID Channel Number Associated Clients 2.4GHz (B+G+N): Allows 802.11b, 802.11g, and 802.11n wireless clients to connect to this router (recommended). This is the name of your
  • Edimax BR-6428HPn | Manual - Page 47
    Item Name Band ESSID Channel Number Associated Clients Description Select from one of the following options: 2.4GHz (B): Allows 802.11b wireless network clients to connect to this router. 2.4GHz (N): Allows 802.11n wireless network clients to connect to this router. 2.4GHz (B+G): Allows 802.11b and
  • Edimax BR-6428HPn | Manual - Page 48
    close the window. Root AP SSID Site Survey Wireless Module Note: If you have a pop‐up blocker installed, you may have to disable it, or set it to allow the pop‐up window to show up. Input the SSID of the wireless access point with which you wish to connect. Click "Select Site Survey" and a pop‐up
  • Edimax BR-6428HPn | Manual - Page 49
    3‐4‐2‐2 WEP Selecting "WEP" enables WEP (Wired Equivalent Privacy) encryption. Item Name Key Length Key Format Encryption Key Enable 802.1x Authentication RADIUS Server IP address RADIUS Server Port RADIUS Server Password Description Two types of key lengths are available: 64‐bit and 128‐bit. Two
  • Edimax BR-6428HPn | Manual - Page 50
    mode than WEP (recommended). Item Name WPA Unicast Cipher Suite Pre‐Shared Key Format Pre‐shared Key Description Please select a WPA cipher suite supported by your wireless client. Available options are "WPA (TKIP)", "WPA2 (AES)", and "WPA2 Mixed". Select a pre‐shared key format here. "Passphrase
  • Edimax BR-6428HPn | Manual - Page 51
    Item Name WPA Unicast Cipher Suite RADIUS Server IP address RADIUS Server Port RADIUS Server Password Description Please select a WPA cipher suite supported by your wireless client. Available options are "WPA (TKIP)", "WPA2 (AES)", and "WPA2 Mixed". Input the RADIUS server's IP address here. Input
  • Edimax BR-6428HPn | Manual - Page 52
    Item Name MAC Address Comment Add Clear Description Input the MAC address you wish to add here. You can input up to 16 alphanumerical characters describing the MAC address here (optional). Click "Add" to add the MAC address and associated comment to the MAC address list. Click "Clear" to remove
  • Edimax BR-6428HPn | Manual - Page 53
    3‐4‐4 WPS (Wi‐Fi Protected Setup) Settings WPS (Wi‐Fi Protected Setup) is a convenient way to establish a secure connection between this broadband router and WPS‐compatible wireless clients. Item Name Enable WPS WPS Status Self PIN Code SSID Authentication Mode Passphrase Key Config Mode
  • Edimax BR-6428HPn | Manual - Page 54
    Settings You can configure such advanced networking functions like QoS, DDNS, port forwarding, and DMZ under "Advanced Settings". 3‐5‐1 QoS Quality of Service (QoS) is a means for computers on the network to share Internet bandwidth with guaranteed bandwidth quality for each device. Without QoS
  • Edimax BR-6428HPn | Manual - Page 55
    Item Name Enable QoS Total Download Bandwidth Total Upload Bandwidth Rule Name Bandwidth Description Check this box to enable the QoS function. You can set a limit to the total download bandwidth here. To disable download bandwidth limitation, input "0" here. You can set a limit to the total upload
  • Edimax BR-6428HPn | Manual - Page 56
    Remote Port Range Traffic Type Protocol Add Reset Edit Delete Selected Delete All Move Up Move Down involved, input the IP address in the left field only. Set the remote port range that will activate this QoS rule. If only one remote port is involved, input a single number here (1 to 65535). If
  • Edimax BR-6428HPn | Manual - Page 57
    for users who do not have a static (fixed) IP address and need to provide services to other users over the Internet. This router supports the following DDNS service providers: z DHS (http://www.dhs.org) z Dyn (http://dyn.com) z ODS (http://ods.org) z TZO (http://www.tzo.com) z GnuDIP (http://gnudip2
  • Edimax BR-6428HPn | Manual - Page 58
    Item Name HostID ISAddr Authentication Type HostPass Description Input the HostID provided by DHIS here. Input the ISAddr provided by DHIS here. Select the authentication type from the dropdown menu (password or QRC). Input the HostPass provided by DHIS here. AuthP/AuthQ (This field appears only
  • Edimax BR-6428HPn | Manual - Page 59
    of the computer in the local network that provides the Internet service. Computer names found in the local network are listed here. You an optional note in the "Comment" field. Up to 16 alphanumerical characters are supported. Click "Add" to add the settings to the port forwarding table. Click "
  • Edimax BR-6428HPn | Manual - Page 60
    Adding a device with a private IP address to the DMZ (demilitarized zone) will map the device's private IP to an Internet IP, so users will be able to access that device over the Internet. Item Name Enable DMZ Public IP Address Client PC IP Address Computer Name Add Reset Description Check this
  • Edimax BR-6428HPn | Manual - Page 61
    This broadband router supports four types of NAT functions. See the following for instructions. 3‐6‐1 Virtual Server This function allows you to redirect a port of an Internet IP address to a specified port of a private IP address, so you can set up an Internet service
  • Edimax BR-6428HPn | Manual - Page 62
    here. You can add an optional note in the "Comment" field. Up to 16 alphanumerical characters are supported. Click "Add" to add the settings to the virtual server table. Click "Reset" to clear local network that provides the Internet service. Computer names found in the local network are listed 61
  • Edimax BR-6428HPn | Manual - Page 63
    TCP Port to Open UDP Port to Open Comment Popular Applications Add Reset here. You can select a computer name and click the "
  • Edimax BR-6428HPn | Manual - Page 64
    . Click "Continue" to configure other settings. 3‐6‐4 ALG Settings The ALG (application layer gateway) feature is a kind of network connectivity support for applications like network gaming and instant online chatting. All ALG requiring applications that are compatible with this broadband router is
  • Edimax BR-6428HPn | Manual - Page 65
    Click "Apply" to save the changes, or click "Cancel" to discard the changes. After you have clicked "Apply", you will see the following message: Click "Apply" to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to
  • Edimax BR-6428HPn | Manual - Page 66
    's MAC address to the "Client PC MAC Address" field. You can add an optional note in the "Comment" field. Up to 16 alphanumerical characters are supported. Click "Add" to add the settings to the table. 65
  • Edimax BR-6428HPn | Manual - Page 67
    Reset Click "Reset" to clear all the settings. If you wish to set up IP address filtering, use the "IP Filtering Table" on this page: Item Name Enable IP Filtering Add PC Description Check this box to enable IP address filtering, and select "Deny" or "Allow" to deny or allow network access to
  • Edimax BR-6428HPn | Manual - Page 68
    Item Name Client PC Description Client PC IP Address Client PC Service Description Input a description for the IP address here. Up to 16 alphanumerical characters are supported. Input the starting IP address in the left field and the ending IP address in the right field. If only one IP address is
  • Edimax BR-6428HPn | Manual - Page 69
    router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 3‐7‐3 DoS The denial‐of‐service attack (DoS attack) is a common attack that paralyzes your Internet connection. Configure the DoS function to prevent such attacks. Item Name Ping of
  • Edimax BR-6428HPn | Manual - Page 70
    Discard Ping from WAN Port Scan Sync Flood Advanced Settings Check this box to ignore all inbound ping requests when malicious intruders try to paralyze your Internet connection with many ping requests. Check this box to block attempts of a malicious intruder trying to scan for open ports on your
  • Edimax BR-6428HPn | Manual - Page 71
    when your computer is present. By default, your computer's MAC address will be listed here automatically. You can also input another computer's MAC address manually in the "MAC Address of Parental PC" field. NOTE: You do not need to enter the punctuation marks in the MAC address. Just enter
  • Edimax BR-6428HPn | Manual - Page 72
    Item Name MAC Weekdays Time Start/Time Stop Add Reset Description Input the MAC address of the computer you want to control (i.e. your child's computer) in the "MAC" field. You can also select a computer in the "Select" dropdown list, and copy it by clicking "
  • Edimax BR-6428HPn | Manual - Page 73
    CHAPTER IV: STATUS, TOOLS & LANGUAGE 4‐1 Status You can check how your router is currently operating under "Status". 1. Click the "Status" tab. 2. Basic system information will be shown under "System". More information can be found in the other subpages under "System". 4‐1‐1 Internet Connection This
  • Edimax BR-6428HPn | Manual - Page 74
    4‐1‐3 System Log This page shows all logged system information. You can click "Save" to download the log file to your computer. You can also click "Clear" to remove all logs, or click "Refresh" to reload the logs. 4‐1‐4 Security Log This page shows all logged security‐related information. You can
  • Edimax BR-6428HPn | Manual - Page 75
    4‐1‐5 Active DHCP Client This page shows all current DHCP clients. You can click "Refresh" to reload the list. 4‐1‐6 Statistics This page shows the statistical information of each network interface and the total system up time. 4‐2 Tools This broadband router comes with several tools that help you
  • Edimax BR-6428HPn | Manual - Page 76
    1. Click the "Tools" tab. 2. You will be able to access the configuration tools, upgrade your firmware, or restart the router here. 4‐2‐1 Configuration Tools You can backup and restore your system configurations here. You can also reset all settings to the factory default. 1. Click "Configuration
  • Edimax BR-6428HPn | Manual - Page 77
    cause the broadband router to malfunction. 4‐2‐3 Restart If your broadband router is not functioning properly or responding slowly, restarting the broadband router may solve the problem. 1. Select "Reset". 76
  • Edimax BR-6428HPn | Manual - Page 78
    restart the broadband router. 3. When you are prompted to confirm the restart, click "OK". 4‐3 Language This broadband router's web‐based user interface supports several languages. You can change the display language with the "Language" dropdown menu at the upper‐right corner of the user interface
  • Edimax BR-6428HPn | Manual - Page 79
    78
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
BR-6428HPn
User Manual
05-2012 / v1.0