Edimax EW-7416APn V2 Manual - Page 31
If you select 2.4GHz B, 2.4GHz N, or 2.4GHz
View all Edimax EW-7416APn V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2-4-1 AP Mode This is the most common mode. When in AP mode, this range extender/access point acts as a bridge between 802.11b/g/Draft-N wireless devices and wired Ethernet network, and exchange data between them. When you select 'AP', the following options will be displayed: Here are descriptions of every setup item: Band Please select the wireless band you wish to use. By selecting different band setting, you'll be able to allow or deny the wireless client of a certain band. If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless clients using the wireless band you select (802.11b, 802.11 Draft-N, or 802.11g) will be able to connect to this range extender/access point. If you select 2.4GHz (B+G), then only wireless clients using 802.11b and 802.11g band will be able to connect to this range extender/access point. Main ESSID If you want to allow 802.11b, 802.11g, and 802.11 Draft-N clients to connect to this range extender/access point, select 2.4GHz (B+G+N). Please input the ESSID (the name used to identify this wireless range extender/access point) here. You can input up to 32 alphanumerical characters. 24