Edimax EW-7416APn V2 Manual - Page 44
Multiple ESSID - windows configure
View all Edimax EW-7416APn V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
will be able to connect to this range extender/access point. If you select 2.4GHz (B+G), then only wireless clients using 802.11b and 802.11g band will be able to connect to this range extender/access point. MAIN ESSID Multiple ESSID Channel Number Associated Clients MAC address 1-4 Set Security If you want to allow 802.11b, 802.11g, and 802.11 Draft-N clients to connect to this range extender/access point, select 2.4GHz (B+G+N). Please input the ESSID (the name used to identify this wireless range extender/access point) here. You can input up to 32 alphanumerical characters. PLEASE NOTE THAT ESSID IS CASE SENSITIVE. The range extender/access point supports multiple SSID function; up to four SSIDs can be set. If you want to configure additional SSIDs, please click this button. For detailed descriptions of the function, please refer to Section 2-4-1-1. Please select a channel number you wish to use. The channel number must be same with another wireless range extender/access point you wish to connect Click 'Show Active Clients' button and a new popup window will appear which contains the information about all wireless clients connected to this range extender/access point. You can click 'Refresh' button in popup window to keep information up-to-date. Please input the MAC address of the wireless range extender/access point you wish to connect Click this button to select an encryption mode for this wireless link, a new popup window will appear. Please refer to Section 2-7 for detailed descriptions. After you finish with setting, please click 'Apply', and the following 37