Edimax EW-7416APn V2 Manual - Page 43
AP Bridge-WDS Mode
View all Edimax EW-7416APn V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
2-4-5 AP Bridge-WDS Mode In this mode, this wireless range extender/access point will connect to up to four wireless range extender/access points which uses the same mode, and all wired Ethernet clients of every wireless range extender/access points will be connected together. You can use this mode to connect a network to other networks which is physically isolated. When you use this mode, this range extender/access point is still able to accept wireless clients. When you select 'AP Bridge-WDS', the following options will be displayed: Here are descriptions of every setup item: Band Please select the wireless band you wish to use. By selecting different band setting, you'll be able to allow or deny the wireless client of a certain band. If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless clients using the wireless band you select (802.11b, 802.11 Draft-N, or 802.11g) 36