Edimax PRI-582 Available from Edimax USA User Manual - Page 66
Routing Table, 7.1 Con
View all Edimax PRI-582 Available from Edimax USA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
5.7 Routing Table 5.7.1 Configure Static Routing: This function allows manually defined by users as the only path to the destination. Users can configure the static routing path to Broadband Router. For example: There have one pc with two interfaces in this area, one interface is connected to Broadband Router (domain A), and the other connected to another Server (domain B). Users need to set the static routing path in Broadband Router to let is recognize that there is another domain in this area. These settings enable the packets from domain A reach the destination in domain B via the gateway configured in Broadband Router. Gateway Mode Router mode: It will disable all the functions those are related to NAT, such as Virtual Server, DMZ, Multi-DMZ, IP Filter, DoS and so on Router mode supports neither PPPoE nor Dial-up connection. It's only been used for the route between two domains. In other words, router mode supports the transmission of data between two different domains via WAN port. The Broadband Routers needs to use static routing or dynamic routing (RIP1/RIP2) to obtain routing table from each other. Thus, the PCs in domain A and PCs in domain B can access the data that are in another domain via the router mode. 66