Electrolux E30DF74GPS Owners Guide - Page 32
To Remove And Replace Oven Door, Oven Light
View all Electrolux E30DF74GPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
32 Care & Cleaning To remove and replace oven door 1. Open the door to the fully opened position. 2. Pull up the lock located on each hinge support toward front of range. You may have to apply a little upward pressure on the lock to pull it up. 3. Grasp the door by the sides, pull the bottom of the door up and toward you to disengage the hinge supports. Keep pulling the bottom of the door toward you while rotating the top of the door toward the appliance to completely disengage the hinge levers. 4. Proceed in reverse to re-install the door. Make sure the hinge supports are fully engaged before unlocking the hinge levers. Removal of the Oven Door Lock in normal position Lock engaged for door removal HINGE SLOT - Door removed from the appliance oven light An interior oven light will turn automatically when the oven door is opened. The oven light may be turned on when the door is closed by using the oven light switch located on the control panel. The lamp is covered with a glass shield. The glass shield can be remove to be cleaned manually or to change oven light. THIS GLASS SHIELD MUST BE IN PLACE WHENEVER THE OVEN IS IN USE. Lift backside of glass shield and remove it. To replace the light bulb: CAUTION: BE SURE THE OVEN IS COOL. Halogen 1. Turn the power off at the main source. Light Bulb 2. Wear a leather-faced glove for protection against possible broken glass. 3. To remove the glass shield, pull the back side of the shield toward the inside of the oven in a manner to lift it up from the oven side. 4. The glass shield should come out easily by pushing a little toward front of the wall oven. 5. Replace halogen light appliance bulb taking care to not touch the bulb. If you touch the halogen bulb with finger that can damage it and also burn it. 6. To replace glass shield, proceed in reverse.