Electrolux E30GF74GPS Use and Care Manual - Page 35
Self-cleaning Cycle Does Not Work, Soil Not Completely Removed After Self, Cleaning Cycle Is
View all Electrolux E30GF74GPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Solutions to Common Problems 35 SELF-CLEANING CYCLE DOES NOT WORK • Make sure the oven door is closed. • Make sure the two oven rack ladders are removed from the oven. • Controls not set properly. Follow instructions. • Self-cleaning cycle was interrupted. Start a clean again, wait 20 seconds for the Lock light to stop flashing, turn off the clean and wait again 20 seconds for the light to turn off. SOIL NOT COMPLETELY REMOVED AFTER SELFCLEANING CYCLE IS COMPLETED • Failure to hand clean oven frame and door liner outside the oven door gasket before starting the self-clean cycle. Hand clean burned on residue with a stiff nylon brush and water or a nylon scrubber. Do not clean the oven door gasket or it will be damaged. FLAMES INSIDE OVEN OR SMOKE FROM VENT • Excessive spillovers in oven. This is normal, especially for high oven temperatures, pie spillovers or for large amounts of grease on bottom of oven. Wipe up excessive spillovers.