Electrolux EI33AR80WS Complete Owners Guide English - Page 13

13 WATER SUPPLY CONNECTION WARNING To avoid electric shock, which can cause death or severe personal injury, disconnect the unit from electrical power source before connecting a water supply line to the appliance. CAUTION To Avoid Property Damage: • Use Copper or Stainless Steel braided tubing for the water supply line. Electrolux does not recommend water supply tubing made of ¼" plastic. Plastic tubing greatly increases the potential for water leaks, and the manufacturer will not be responsible for any damage if plastic tubing is used for the supply line. • DO NOT install water supply tubing in areas where temperatures fall below freezing. Before Installing The Water Supply Line, You Will Need: • Basic Tools: adjustable wrench, flat-blade screwdriver, and PhillipsTM screwdriver • Access to a household cold water line with water pressure between 30 and 100 psi. • A braided stainless steel water supply line with integral fittings such as Smart Choice® 5304437642 or ¼" copper line with compression fittings. The line must be 6˙ or longer to allow appliance to be moved out for cleaning. • A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type shutoff valve. • Do not reuse compression fitting or use thread seal tape. • A compression nut and ferrule (sleeve) for connecting a copper water supply line to the water valve.  NOTE Ensure that your water supply line connec- tions comply with all local plumbing codes.