Electrolux EIDW1805KS Installation Instructions (English) - Page 9

Installation Instructions STEP 10 SECURE DISHWASHER TO COUNTERTOP OR CABINET In this step you will need the 2 Phillips special head screws set aside prior to Step 1. The dishwasher must be secured to the countertop or the cabinet sides. When countertops are mad of wood, use Method 1. When countertops are granite or other materials that will not accept screws, use Method 2 tos secure dishwsher at the sides. Figure S-2 STEP 11 CONNECT WATER SUPPLY Connect water supply to 90° elbow. • Slide compression nut, then ferrule over end of water line. • Insert water line into 90° elbow. • Slide ferrule against elbow and secure with compression nut. Figure S-1 IMPORTANT : Drive Screws straight and flush. Protruding screw heads will scratch the top or sides of the control panel and can interfere with door closing. Method 1: Secure dishwasher to Wood Countertop. • Fasten the dishwasher to the underside of the countertop with the 2 Phillips special head screws provided. Method 2: Securew dishwasher with side-mounting brackets. • Remove plug buttons (one on each side). • Install screws through the dishwasher side mount bracket and into the adjacent cabinet on each side. Reinstall plug buttons. IMPORTANT - Check to be sure that door springs does not rub or contact the fill hose or water supply line. Test by opening and closing the door. Re-route th lines if a rubbing noise or interference occurs. When step is complete, close dishwasher door and verify that gap between countertop and top of dishwasher door is at least 1/2". 9