Electrolux EWFLS70JIW Installation Instructions (All Languages) - Page 14

Reversing door and hardware

Get Electrolux EWFLS70JIW PDF manuals and user guides
UPC - 012505382796
View all Electrolux EWFLS70JIW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

14 Reversing Door Reversing door and hardware E) Reattaching Door Lock to Front Panel 1 Rotate the door lock and move it to the opposite opening. 2 Connect the harness to the door lock by inserting it in the terminal and firmly pushing it in place. F) Reattaching Hinge to Front Panel 1 Rotate the hinge and move it to the opposite opening. 2 Connect the harness to the hinge retainer by inserting it in the retention terminal and gently pushing until you hear the fastening tab click. 3 Gently pull on the harness to be sure it is secure. 3 Insert the harness connection through the front panel first, and then pivot the lock until it is flush. Slide the lock toward the center of the front panel until the screw holes line up. 4 Use the side locating pins to align the hinge and install 1 short, fine-thread, counter-sunk screw in the center hole of hinge side. 4 Secure the lock with 2 short, course-thread, panhead screws. 5 Install the other 2 short, fine-thread, countersunk screws in the upper and lower holes of hinge side. 6 Install 2 short, course-thread, panhead screws through hinge plate.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
14
Reversing Door
E) Reattaching Door Lock to Front Panel
1
Rotate the door lock and move it to the
opposite opening.
2
Connect the harness to the door lock by
inserting it in the terminal and firmly pushing
it in place.
4
Secure the lock with 2 short, course-thread,
panhead screws.
3
Insert the harness connection through the
front panel first, and then pivot the lock until
it is flush. Slide the lock toward the center of
the front panel until the screw holes line up.
F) Reattaching Hinge to Front Panel
1
Rotate the hinge and move it to the opposite
opening.
2
Connect the harness to the hinge retainer
by inserting it in the retention terminal and
gently pushing until you hear the fastening
tab click.
3
Gently pull on the harness to be sure it is
secure.
4
Use the side locating pins to align the hinge
and install 1 short, fine-thread, counter-sunk
screw in the center hole of hinge side.
5
Install the other 2 short, fine-thread, counter-
sunk screws in the upper and lower holes of
hinge side.
6
Install 2 short, course-thread, panhead
screws through hinge plate.
Reversing door and hardware