Electrolux EWFLS70JIW Installation Instructions (All Languages) - Page 5
Clearance requirements
UPC - 012505382796
View all Electrolux EWFLS70JIW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Installation Requirements 5 Clearance requirements IMPORTANT DO NOT INSTALL YOUR WASHER: 1. In an area exposed to dripping water or out- side weather conditions. The ambient temperature should never be below 60° F (15.6° C) to maximize detergent effectiveness. 2. In an area (garage or garage-type building) where gasoline or other flammables (including automobiles) are kept or stored. 3. On carpet. Floor MUST be solid with a maximum slope of 1 inch (2.54 cm). To minimize vibration or movement, reinforcement of the floor may be necessary. INSTALLATION IN A RECESS OR CLOSET If washer and dryer are installed in the same closet, door ventilation is required: A minimum of 120 square inches (774.2 cm²) of opening, equally divided at the top and bottom of the door, is required. Louvered openings should be located 3 inches (7.6 cm) from bottom and top of door. Air openings are required to be unobstructed when a door is installed. A louvered door with equivalent air openings for the full length of the door is acceptable. MINIMUM INSTALLATION CLEARANCES - Inches (cm) SIDES REAR TOP FRONT Alcove 0" (0 cm) 0" (0 cm)* 0" (0 cm) n/a UnderCounter 0" (0 cm) 0" (0 cm)* 0" (0 cm) n/a Closet 0" (0 cm) 0" (0 cm)* 0" (0 cm) 1" (2.54 cm) 0" (0cm) 0" (0cm) 3" (7.6cm) 1" (2.54cm) 60 sq. in. (387.1cm²) 0" (0cm) 3" (7.6cm) closet door 60 sq. in. (387.1cm²)