Epic Fitness E 760 Elliptical English Manual - Page 5

ASSEMBLY To hire an authorized technician to assemble the elliptical exerciser, call toll-free 1-800-445-2480. Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included allen wrenches, assembly requires a phillips screwdriver , two adjustable wrenches , a rubber mallet , and pliers . As you assemble the elliptical exerciser, use the drawings below to identify the small parts used for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST on pages 20 and 21. The number following the key number is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the parts bag, check to see if it has been preassembled. M6 Washer M8 Split M8 Washer (102)-2 Washer (122)-4 (132)-4 M10 Split M8 Jam Nut M10 Nylon Washer (118)-3 (91)-6 Locknut (90)-2 M4 x 25mm Round M6 x 16mm Button Head Screw (115)-2 Screw (103)-4 M4 x 16mm Round Head Screw (125)-1 M4 x 16mm Screw (99)-4 M8 x 52mm Button Screw (100)-4 M10 x 25mm Button Screw (123)-3 Bolt Set (101)-2 M10 x 92mm Carriage Bolt (124)-2 M10 x 105mm Button Screw (89)-2 1. Identify the Front Stabilizer (29), which has Wheels (44) attached to it. While another person lifts the front of the Frame (1), attach the Front Stabilizer to the Frame with two M10 x 92mm Carriage Bolts (124) and two M10 Nylon Locknuts (90). 1 124 M8 x 42mm Button Bolt (116)-4 M8 x 35mm Button Bolt (117)-2 90 44 29 1 5