Epson 2180 User Setup Information - Page 17

If Your Printer Stops Printing Unexpectedly... Check the printer's control panel lights and follow the appropriate instructions below. For more information, see Chapter 7 of your User's Guide. The printer stops printing and the Pause light is on. Cause The printer is paused. The printer cover is open. You moved the paper release lever while paper from another paper source is currently in the paper path. Solution Press the Pause button to resume printing. Close the printer cover, then press the Pause button to resume printing. Move the paper release lever back to the appropriate position and press the Load/Eject button to feed the paper out of the paper path. Then set the lever to the position you want to use. Press the Pause button to turn off the Pause light, if necessary.* *If you are using the pull tractor, see your User's Guide for instructions. The Paper Out and Pause lights are on. Cause No paper is loaded in the selected paper source or paper is not loaded correctly. Paper is jammed in the printer. Solution Load paper in the printer, then press the Pause button to turn off the Pause light, if necessary. See "Clearing Paper Jams" or page 14. The Paper Out light is flashing and the Pause light is on. Cause Continuous paper is not fed to the standby position. A single sheet of paper is not fully ejected. Paper is jammed in the printer. Solution Tear off the printed document at the perforation; then press the Load/Eject button. The printer feeds the paper to the standby position. Press the Pause button to turn off the Pause light. Press the Load/Eject button to eject the sheet. Then press the Pause button to turn off the Pause light, if necessary. See "Clearing Paper Jams" or page 14.