Epson 4180 Start Here Card - Page 3

Connect the cable for the built-in film adapter. - software

Get Epson 4180 - Perfection Photo PDF manuals and user guides
UPC - 010343850880
View all Epson 4180 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

3 Connect the cable for the built-in film adapter. 4 Connect the power cord and AC adapter, as shown. AC adapter Power cord 5 Connect the AC adapter to the scanner. Then plug the power cord into an electrical outlet. 6 Use the USB cable that came with your scanner. Plug the square end of the USB cable into the scanner's USB port. Then plug the flat end into any available USB port on your computer or hub. Note: Your scanner may not work correctly if you use a USB cable other than the one supplied by Epson or if you connect it through more than one hub. 7 Turn on the power switch on the side of the scanner. The scanner turns on and the ] Start button flashes green. It stops flashing and stays green when the scanner is ready. 8 For Macintosh, restart your system to fully activate the scanner and software.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
3
Connect the cable for the built-in film adapter.
4
Connect the power cord and AC adapter, as shown.
5
Connect the AC adapter to the scanner. Then plug the power cord into an
electrical outlet.
6
Use the USB cable that came with your scanner. Plug the square end of the
USB cable into the scanner’s USB port. Then plug the flat end into any
available USB port on your computer or hub.
Note:
Your scanner may not work correctly if you use a USB cable other than
the one supplied by Epson or if you connect it through more than one hub.
7
Turn on the power switch on the side of the scanner.
The scanner turns on and the
]
Start button flashes green. It stops flashing
and stays green when the scanner is ready.
8
For Macintosh, restart your system to fully activate the scanner and
software.
AC adapter
Power cord